GMKtech K8 8845hs mounting brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgraded mounting for GMK tech 8845hs mini pc (Original version)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
For fitting into a small 3d printed case I chose to redesign the mounting for the cooler mount that I had created and with the mount in place the Noctua cooler sits on the die a lot better and when stress testing the temps never went above 90c which is great. The fan is connected via a usb 5v adapter. The fan is not loud and works great and no over heating when playing games. this had been on my mind for a while now and with the use of a case I seen I had to do this as the OG case from the factory was a hot mess - hence they made a v2 of it. I have printed in 100% PETG and I feel fine using it. for intense gaming id suggest using ABS/ASA which ever you prefer.
NOTE: If using the mount use the lower holes on the mount. This will give good coverage of the die. 0.4mm Nozzle used
Cooler: Noctua NH-L9x65