GMKtech K8 8845hs mounting brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgraded mounting for GMK tech 8845hs mini pc (Original version)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
For fitting into a small 3d printed case I chose to redesign the mounting for the cooler mount that I had created and with the mount in place the Noctua cooler sits on the die a lot better and when stress testing the temps never went above 90c which is great. The fan is connected via a usb 5v adapter. The fan is not loud and works great and no over heating when playing games. this had been on my mind for a while now and with the use of a case I seen I had to do this as the OG case from the factory was a hot mess - hence they made a v2 of it. I have printed in 100% PETG and I feel fine using it. for intense gaming id suggest using ABS/ASA which ever you prefer.
NOTE: If using the mount use the lower holes on the mount. This will give good coverage of the die. 0.4mm Nozzle used
Cooler: Noctua NH-L9x65