1 / 3
Skadis Dual Paint Holder: Citadel & Vallejo — image 1
1 / 3

Skadis Dual Paint Holder: Citadel & Vallejo

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dual-socket Skadis holder that fits both Citadel and Vallejo paint bottles in the same hole. No more choosing one system

Rating
0 / 5
Likes
5
Downloads
17
Makes
0
Views
87
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

Skadis Dual Paint Holder: Citadel & Vallejo, One System

Stop choosing between paint brands. Now your Skadis holds both.

If you paint miniatures, you know the struggle: Citadel and Vallejo bottles have completely different bases, so most storage systems only work for one or the other. This module fixes that with a simple trick a two-level socket that grips both.

How it works

Each hole has a wide upper cavity sized for Citadel pots, with a narrower second level nested inside it that catches Vallejo bottles (17–18ml) perfectly. Same slot, both brands, just drop in whichever one you're reaching for that session.

Why this one's different

Most paint racks force you into fixed blocks: print the 5-slot, print the 10-slot, and thats it, you need to calculate everything to fit. This system comes in 5-slot, 3-slot, and a standalone 1-slot piece so you can print exactly the number of holders you need and tile them across your Skadis panel however you like. Odd number of paints? Awkward corner to fill? The single-slot piece has you covered. (Will keep perfecting the design with a parametric one so you will be able to make your own here)

Features

  • 🎨 Dual compatibility: one hole, two paint systems (Citadel wide base + Vallejo narrow base)

  • 🔩 T-Clip mount: locks straight into any Skadis panel, no screws, no extra hardware

  • 🧩 True modularity: mix 5-slot, 3-slot, and 1-slot pieces to fit your exact paint count and panel layout

Included files

  • 5-slot module

  • 3-slot module

  • 1-slot module (for filling gaps or one-off additions)

Print settings

  • Material: PLA or PETG (PETG if the panel sits near a window or heat source)

  • Layer height: 0.2mm recommended

  • Infill: 10-15% gyroid

  • Supports: Not needed

  • Orientation: Flat on the bed

Built for painters who are tired of digging through drawers mid-session. Mount it, fill it, paint faster.

Any tips or ways to improve it are always welcome

P.s: real photos coming soon, right now only have 1 bottle each, so waiting for my friend to send pcitures of his setup.

Tags