1/2" Wera Twist'n lock Socket Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lock your Sockets in place
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I like Wera’s system for locking sockets in place, so I made a 1/2-inch version with the same satisfying “click.”
Click the cap onto the insert, place the socket on it, and turn it to lock it in place.
I made two different inserts: one for Wera sockets and one for Kraftwerk sockets, as these are the brands I was able to test. The groove inside the Kraftwerk sockets is shallower and positioned lower in the socket.
The base of the insert is a 28 × 28 mm square, so you can integrate it into one of your own designs. I will create my own base soon and upload it here.
For printing, I used PETG with a 0.15 mm layer height (Balanced), and a 0.4 mm nozzle. It works well.
Please print the cap upside down. This gives better results for the pin in the center :) and use Supports everywhere unfortunately i couldn't come up for a solution without it...