Nordica 16 Sailboat Tiller Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement for the wood bits atop the 1" wide rudder that form a socket for the tiller handle.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
The wooden tiller handle mount on the rudder was getting soft where years of wear wore away the varnish. (Try saying that 3 times fast). Purists may be upset, but I decided on a 3D printed version. I traced out the original on graph paper for precise reproduction in CAD. I prototyped this in PLA but strongly recommend at least PETG or preferably ASA for longevity.
The 5 mounting holes are sized to recess M6 x 55mm stainless steel socket cap screws on one side and M6 x 12mm brass heatset inserts on the other. The hole positions are located where MY mounting screws were found -- but photo's I've seen of other Nordica's only show 4 bolts, so yours may differ. Parametric Freecad file included for customization.
Obviously this needs to be strong. You don't want the tiller breaking it off while fighting a strong wind. Print laying flat with full support. I found Orca's "snug" setting peeled out of the pockets very nicely. Lots of walls, tops and bottoms. I used 6 of each with 40% gyroid infill.