Parametric Sliding Lid Box with snap latch
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.15 – €1.41 net (excluding VAT)
For file: lid_110x110x30_0.6n_0.25mm_PETG_MK4S_29m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.28 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 28.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A fully customizable box with sliding lid that snaps closed.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Design
This is yet another box with a sliding lid. The main distinguishing feature is the lid snap locking when closed.
I have included 2 sizes that I made for my wife's knitting/crocheting items.
Printing
Printing is simple and standard settings will work just fine. No support needed. I recommend using .20 layer height, which will slow down the printing of large boxes, but larger layer heights may affect the slide clearance and the snap mechanism.
Customizing
This design is in Fusion 360 (included). You may change many of the parameters to suit your needs. Here's a list of most of them:
Inside Length, Inside Width, Inside Height
The inside dimensions are the net usable.
If you would prefer to base your box on outside dimensions, simply subtract 2 wall widths from the inside dimensions (you will see them in the parameter list).
Inside Smoothing
The radius of the filet used for the inside edges (walls and floor).
You can make this as big as you want.
If you want no smoothing, change the value to 0.01 (zero will give an error).
Wall Thickness
May be 1.5 and larger.
Lid Clearance
Test and adjust as needed. I have provided a small test box that uses 0.15. The most likely values are 0.10 to 0.30.
Flex Snap
The snap locking can be made softer or firmer.
The range is from 1 to 4, with larger values being softer.