Window Lower Hinge Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable replacement lower hinge cover for uPVC/PVC windows. No supports required.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Window Lower Hinge Cover.
3D-printable replacement cover cap for the SIEGENIA corner hinge used with uPVC/PVC window hardware.
A 3D-printable replacement protective cover for the lower hinge of uPVC/PVC windows.
This cover helps protect the hinge mechanism from dust, dirt, and moisture while restoring the clean appearance of the window hardware.
Dimensions
Height: 73 mm
Width: 14 mm
Depth: 16 mm
Hinge cutout width: 6 mm
Please check your original cover and hinge dimensions before printing. See the drawing for detailed dimensions.
Print Settings
Layer height: 0.16 mm
Nozzle: 0.4 mm
Walls: 3
Infill: 15% Gyroid
Supports: Not required
Brim: 5 mm recommended
Material: PETG recommended
Printing Notes
The part is relatively tall and narrow, so a 5 mm brim is recommended to improve bed adhesion and reduce the risk of the part detaching during printing.
Print the model with the flat side on the build plate.
PETG is recommended for window applications because of its better heat resistance compared with PLA. PLA can be used for indoor applications or windows that are not exposed to direct sunlight.
If you print this model, feel free to share your make and feedback.