1 / 3
Skådis goes Billy! Hook/bracket to hang an IKEA Skadis board of a Billy cabinet — image 1
1 / 3

Skådis goes Billy! Hook/bracket to hang an IKEA Skadis board of a Billy cabinet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Needed a way to hang a small Skådis peg-board to the side of my IKEA Billy cabinet.

Rating
0 / 5
Likes
6
Downloads
24
Makes
0
Views
184
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial
Skådis hook for IKEA Billy

Hang a Skådis pegboard on a Billy bookcase without drilling a single hole. It hooks over the top edge of the panel and clamps the board with one M4 bolt into the screws that come with the board. Lift it off and the cabinet is unmarked.

Print settings
  • No supports, no brim

  • 0.2 mm layer height

  • 5 perimeters

  • 25 percent gyroid infill

  • 5 top and 5 bottom layers

  • PLA or PETG both work well

Design notes
  • Printed flat so the layer lines run with the load, not across it. This is the strongest orientation for a hook.

  • Avoid sharp corners. Filleted inner corners spread the peak stress instead of concentrating it in one point.

  • Teardrop bolt hole makes the bore self supporting, so no supports needed.

Assembly

Drop the M4 nut in the recess, hook the bracket over the panel edge, bolt the SKÅDIS on. Snug, not tight. I have a Billy case that's 39cm deep so the SKÅDIS 36x56 cm fits nicely. I designed this for the Billy which has 18.25mm side panels. Optionally secure the nut with a drop of glue or epoxy just to keep it in place. Could've made the tolerance tighter so it would be press-fit, but not all printers have the same tolerance.

Before you load it up

Keep the load light. This is a friction and gravity hook, nothing more: there is no mechanical lock holding it to the cabinet. Hang tools and small parts, not anything heavy or fragile.

Also worth saying: hanging weight on the side of a tall bookcase adds a sideways load. If your Billy is not anchored to the wall with the bracket IKEA supplies, do that first. And yes, I ignored the IKEA warning to fasten it to the wall and take full responsibility.

Tags