1 / 1
1/8" BSP Bowden connector mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made for the Precision Piezo hotend probe, but good to attach a Bowden coupler to any effector using M3 screws 25mm…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Made for the Precision Piezo hotend probe, but good to attach a Bowden coupler to any effector using M3 screws 25mm apart.
As for the original, use a heatgun to warm the plastic, then screw the coupler.into the mount. Be careful not to warp the mount.
The hole in the middle is 9.2mm diameter, which is good for my Bowden coupler, which I believe has a BSP 1/8" thread.
Category: 3D Printer Parts