Counting matching models…
After spending some time building diy Drum triggers, I created this one. This solid should work for most toms and snares. Cut up a sponge and glue a piezo on it. When mounted on a tom you can use it to trigger a sound from your drum…
Just in time to shock some of your friends on April Fool's! Uses a regular piezo lighter ignition module, M3 bolts and nuts to close the case, and at the contact points at the top. Edit 3/28:Added a version with a captive trigger. The…
Keep shocking your friends and family! This model uses a regular lighter piezo ignition module, M3 bolts and nuts to close the case, and at the contact points at the top, as in the original. Version 2 includes refined geometry to print…
This is a recreation of the part that comes with those cheap ultrasonic cold fog humidifier modules. The ones that came with mine are soluble in chloroform so they couldn't be used in my pla vapor smoothing setup. Print in petg and you…
Plastic piece to hold the spring against the piezo sensor on the back of the drum pad. Allows use of some pads on older drum sets. Some drum set pads (The Beatles Rock Band) the black plastic piece on the back of the yellow and blue pads…
Contact Microphone Enclosure for Piezo contact microphone using 27mm piezo discs.
Some folks feel that the piezoelectric sensors that help with initiating bed leveling in the four corners may be heat sensitive. I noticed that the original bed level sensors are protected by a thin insulating foam tap. so I designed this…
All parts are correctly oriented for printing. For the fan ducts use supports from build plate only, I use Overhang Threshold: 10 on PrusaSlicer. All other parts print with no supports. V3-FanDuctLeft.stf and V3-FanDuctRight.stl are…
Full build guide here Choose the top and bottom model that fits your piezo and magnet sizes. Available sizes are Piezo : 12, 15, 35 mm Magnets : 8, 10, 12 mm Tips Go to a thrift store and get an aux to RCA cord if you can (easier since it…
This is a mount for the Creality CR-10 family of printers (and others with the same X carriage) and the PrecisionPiezo Orion probe. It works with the groove clamp from this thing ( https://www.thingiverse.com/thing:2841681 ), which is the…
Mount for 12mm diam. piezo buzzer. Print Settings Printer: CTC 3D Rafts: No **Supports:** No Resolution: 0,15 **Infill:** 50 Category: R/C Vehicles
Printed with PETG. Will work with other types of piezoelectric actuators longer than 20mm. Uses IGUS DryLin railing.
CHIRON FULL LINEAL GUIDE Update: the option to install a 27mm precision piezo sensor is added. To do this, replace the piece called REAR_REINFORCEMENT.obj, with the two pieces named as piezo refuerzo carro piezo A and B. Update 2, drawing…
This is a custom-designed enclosure for the affordable ultrasonic piezoelectric mist maker modules commonly found on Amazon and AliExpress. It’s a functional and stylish piece designed to turn a simple DIY electronics kit into a finished…
An application of my original design of an electronics box. This one has a built-in resonator for a 28 mm diameter piezo disc. The cavity allows for a sound volume of the same level as a commercial keychain burglar alarm. Category:…
I wanted to create a very loud speaker arrangement using four 3.5" Motran piezoelectric tweeters. This printed waveguide design boosts the sound directivity significantly. The results are super loud & annoying soundwaves, much like the…
Sice Mosquito/Magnum Precision Piezo Orion Mount Mount to use Slice Engineering Mosquito and Magnum hotends with the Precision Piezo Orion z-probe. This is the bottom part of the Orion mounting system only - the upper section does not…
Just a small (5x5x1cm) Case for a 27mm Piezo Disk to use ist as a Contact Microphone. In the bottom is a 15mm hole to glue a magnet in, which also is used to ensure a direct connection between the ground an the piezo disk. Additinal…
DEPRECATION WARNING: I consider this thing now deprecated. I have designed my own mount which I consider to be superior to this one. Check it out here: https://www.thingiverse.com/thing:3564610 Old text: Original thing:…
I have a Precision Piezo Orion sensor on the way for my Hypercube 300 build. The Piezo Lite Carriage is designed for the older Piezo20 sensor. This remixes the Piezo Lite Carriage for compatibility with the Orion sensor. I've also…
This is an underbed mount for 20mm piezo discs. made for Geeetech G2s Pro Delta Printer. Category: 3D Printer Parts
Speaker holders for a cheap piezo speaker which is about 50 mm in diameter and has screw posts to mount it. I made these for some lab work but they could still be useful for other people. Including the fusion360 files to make it easily…
Railcore Bondtech BMG & Precision Piezo Orion Mount(s) This is a lengthy ReadMe that includes printing suggestions and required additional hardware. Additional components are listed at end, including required Piezo Mount. Update March 2…
Based on "E3d Hemera Mount for Precision Orion Piezo - Hypercube Evolution - HEVO" https://www.thingiverse.com/thing:4085641 I design my own head for E3D Hemera/ Trianglelabs matrix extruder for the HEVO NGEN first generation. The fan…
I designed this to be able to use a piezo probe on the Anycubic Predator. Since the head is close to the heater cartridge, I would recommend printing this in PETG or ABS (or any other material that can withstand high heat). Update 1…
Railcore II E3D v6 Threaded Heatsink Precision Piezo Bottom Mount Bottom mount for the Precision Piezo Orion z-probe and E3D v6 with the Threaded Heat Sink. Part of the Emma Puggle Railcore II component set. Part of the Emma Puggle…
A great amount of effort and time went into the design, testing and troubleshooting of this thing! Please be so kind and consider leaving a tip if you decide to print and install this and share a make of your results. Advantages of this…
Railcore II Bondtech BMG & Precision Piezo Orion Mount Mount to allow use of the Precision Piezo Orion z-probe and BMG Extruder on the Railcore II with the ultralight Aluminum Y-Carriage. For a printed parts only version see my thing at…
A quick mashup to be able to mount the 5015 fan and the Piezo sensor mount using the same screws. https://www.thingiverse.com/thing:3561449 https://www.thingiverse.com/thing:2771867 Category: 3D Printer Parts
Unpress Alert: A compact ATTiny85-powered security device sounding alarms upon button release. https://www.pcbway.com/project/shareproject/Piezo_Alert_System_b2702245.html
Update 15/07/2019 I've pushed an updated version of the mount. After tens of prototypes I'm finally glad with the performance of this one. It's the file named Piezo Mount V3.stl in the files section. It uses the same screws as the V2: 2…
This is the top part for the Precision Piezo Orion module specifically designed to fit into the Titan Extruder clone by Tevo. I found that my hotend was wobbling way to much. Sometimes it would even jump a couple of mm, which looked like…
Needed a way to mount this 19mm threaded Piezo switch: https://a.co/d/hElVAtw onto my test bench. Fits switch with 22mm diameter head & 25mm diameter lock nut Thought i'm likely not alone in this. Has cutouts to allow wiring &…
Direct drive with BMG and piezo orion, pancake 25 or 28mm, for NGEN caution : the chain holder is higher, because it's specific to my HEVO 3D live view : https://a360.co/2ZaA3Uh 09/07/2020 : STEP and F3D files added, carriage renforced…
I've redesinged my old extrudermount. It's now shorter and fits an Sliced Engineering Mosquito. I've also removed the retrainer for the Piezo. Still Work in Progress I desinged a new mount for my Misumi Rail and now i have to rearange all…
This mount allows you to use the Precison Piezo Orion bed level sensor, E3D V6 with Titan direct extruder, with Lion4H his Radial Fan Fang ( https://www.thingiverse.com/thing:2175956 ). More room was needed to clear the Precision Piezo…
Added a collar to the top piece of the piezo holder, so that you can install the bowden tube pneumatic connector there. Printed the original, but am guessing that its meant for use with an original e3d v6 and/or Titan - it doesn't fit…
This is a remix of a great extruder mount for the HEVO https://www.thingiverse.com/thing:2617424 and an FT-5 Carriage - RJ45 x 2 round sensor Mount https://www.thingiverse.com/thing:2569068 . Remixed the duct Hypercube-Evo fan duct for…
Mount for piezo on TBS v4 drone frame.
A muffler for your piezo buzzer. Signifigantly drops the decibels of the piezo buzzer output when stuffed with foam. Needs minor adjustment to ID of circle opening for a closer fitment. I needed to wrap my piezo in tape to get the proper…
Wasn't too happy with the top-end sound of the stock Meridian audio in my EV6. Found this review on the DS-18 piezo super tweeters: Link to the tweeters on Amazon: https://www.amazon.com/dp/B07FM4X5LL Found they would not fit into the…
You can build a piezo spark transmitter for use with Coherer detectors. https://youtu.be/vZEtZ4koq_c How I Designed This I used design spark mechanical to design the case. Category: Electronics
Piezo disk assembly for the flex3drive module for modular X-carriage . Intended to be used with Precision Piezo electronics and disk. print secure the piezo disk in the flat ring (20mm piezo disk holder.stl) flat ring goes directly under…
This is a Precision Piezo mount for the Reach 3D printer. It uses the kit from here: Precision Piezo: https://www.precisionpiezo.co.uk This part replaces either the screw mount or groove mount top piece. There is also a funnel that takes…
Mounting pieces to mount a positioning stage of a scanning electrochemical microscope (SEPM). Includes amounting plate to connect a Newport XYZ manual stage to an optical breadboard and attach to it a PI cube piezo. Includes A “S” neck…
Fits around a 2" pipe and holds a common barbecue grill piezoelectric igniter. For use as a lightweight trigger on a spud launcher. Category: Engineering
Holds a 30mm x 5.5 mm piezo buzzer, 35 mm center to center screw holes using M2 self-tapping screws.
I wanted to mount a 38mm Kemo Electronics piezoelectric tweeter to a 2" PVC tube to improve the sound directivity. This design holds on to the tube & tweeter assembly.
This is a mount for the Creality CR-10 family of printers (and others with the same X carriage) with the PrecisionPiezo Orion Z probe and a Zesty Nimble remote direct extruder. You'll need a PrecisionPiezo Orion. I recommend you get the…
Update 11/15: Switched to a BMG vlone and added a compatible part cooler blower channel for BMG+V6+Volcano. Piezo leveling is still working great and I have switched back and forth between the Aero and BMG with almost no adjustment.…
No supports needed. I replaced the pin in the cherub (which is a kind of hard to remove split-pin kind of thing) with a simple m3 screw.
Do válce vložte prázdný piezo zapalovač (průměr 10 mm). Kápněte dovnitř trochu lihu (stačí pár kapek). Uzavřete víčkem a protřepejte, aby se palivo odpařilo. Zmačkněte piezo zapalovač. Víčko (píst) díky prudkému zvýšení tlaku vystřelí…
you can use ether holder as a trigger
Turn a salvaged utility-lighter spark mechanism into a compact handheld stove igniter. Inspired by the handheld MSR Piezo Ignitor, this housing holds the piezo mechanism and its original wires from a Scripto Multi-Purpose Utility Lighter.…
Fits around a 2" pipe and holds a common barbecue grill piezoelectric igniter. For use as a lightweight trigger on a spud launcher. Category: Engineering
Do válce vložte prázdný piezo zapalovač (průměr 10 mm). Kápněte dovnitř trochu lihu (stačí pár kapek). Uzavřete víčkem a protřepejte, aby se palivo odpařilo. Zmačkněte piezo zapalovač. Víčko (píst) díky prudkému zvýšení tlaku vystřelí…
Wall plate to hold electronic Piezo buzzer ( https://a.co/d/9ASUl6I ). Has two insets on back for command strips.
Just in time to shock some of your friends on April Fool's! Uses a regular piezo lighter ignition module, M3 bolts and nuts to close the case, and at the contact points at the top. Edit 3/28:Added a version with a captive trigger. The…
