Handheld Piezo Stove Igniter Housing — Scripto Utility Lighter Spark Mechanism piezoelectric igniter for backpacking
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Press-fit handheld housing for a piezo spark mechanism salvaged from a Scripto utility lighter, for lighting camping sto
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn a salvaged utility-lighter spark mechanism into a compact handheld stove igniter.
Inspired by the handheld MSR Piezo Ignitor, this housing holds the piezo mechanism and its original wires from a Scripto Multi-Purpose Utility Lighter. Only the spark mechanism is reused—the lighter’s fuel reservoir is not part of this build.
The mechanism presses tightly into the printed housing without additional fasteners or adhesive. I use mine with a white-gas camping stove.
The complete assembled igniter weighs just 7 grams, including the printed housing, piezo mechanism, and original wires—a compact addition to a backpacking stove kit.
Mechanism dimensions
• Main body: approximately 6 × 8 mm.
• Overall height: approximately 27 mm.
• Circular base: approximately 6.7 mm diameter (3.35 mm radius).
Check your mechanism against these dimensions before printing, as lighter internals may vary.
Assembly
Insert the salvaged piezo mechanism into the housing using the tight press fit, retaining its original wires. Check that the button operates freely and produces a spark
Compatibility
This is a handheld igniter rather than a stove-specific attachment. Ignition depends on the stove, fuel, and spark placement; compatibility with every stove