Dacia Jogger – vyrovnávací podložky sedadel / seat leveling spacers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vyrovnání sklopených sedaček Dacie Jogger na rovné lůžko / Seat leveling spacers for a flat bed in Dacia Jogger
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 165
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Když v Dacii Jogger sklopíte druhou řadu sedaček, nevznikne rovná plocha — pro to je potřeba sedadla podložit.
Tiskne se 4× — jeden pod každý úchyt sedadla ve druhé řadě. Nasadíte je po sklopení sedaček, položíte matraci (nebo desku postele) a spíte na rovině.
Tisk
PETG nebo ASA, ne PLA
0,2 mm vrstva, 8 perimetrů, 30–40 % výplň (gyroid
Doporučuji podpěry
Pokud se Vám nechce tisknout, mám podložky i dřevěné s magentickými úchytkami.
K Joggeru mám zdarma i výkresy celé skládací postele (PDF + 3D model): https://plato.camp/cs/diy/dacia-jogger
====
Fold down the second-row seats in a Dacia Jogger and you don't get a flat surface — this part levels it out.
Print 4× — one under each second-row seat mount. Drop them in after folding the seats, add your mattress (or bed board), sleep level.
Printing
PETG or ASA, not PLA
0.2 mm layers, 8 perimeters, 30–40 % gyroid infill
Recommended to print with supports
Free plans for the whole folding bed (PDF + 3D model, Czech): https://plato.camp/cs/diy/dacia-jogger