1 / 3
Cable inlet caravan floor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inlet for cables through the caravanfloor
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I made these inlets for the cables of my caravan mover. I used the double ones.
Just drill a 20mm hole in the bottom, and stick the inlet in from the under side. First apply an amount of PolyMax or something on the flange. Fits for 12mm flexible tube. For other sizes you can scale the stl file as you need. You can apply a small screw to hold the inlet while the PolyMax is setting.
The red part finishes the top side of the holes, no glue needed, just press fit.
The double inlet tubes are 50mm apart, max bottom thickness is 61mm