BQ Station G3 Case with Snap-Fit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy-to-print case for the BQ Station G3 Mesh radio with snap-fit lid for easy access
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 76
- Makes
- 2
- Views
- 242
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An easy-to-print case for the BQ Station G3 Mesh radio with snap-fit lid for easy access. I didn't like that the original design required gluing the lid on so added some snap-fit tabs for a secure fit while still making the lid removeable. I would have designed it from scratch but I don't have a BQ Station G3 myself and was printing for someone else.
Zero Supports needed.
Printed with:
Prusa MK4S 0.4mm nozzle
0.2mm layer height
5% Gyroid infill
Overture PETG
As with the original design - M3 x 5mm length bolts and M3 x 4x 4.2 heat set inserts used to mount board (need to temporarily remove RF module).
Edit: Fixed error in heatsink location to properly fit now and removed incorrect lid stl file.