1 / 14
Modular Bee Swarm Trap & Trap-Nest (Eco Garden Bee Catcher) — image 1
1 / 14

Modular Bee Swarm Trap & Trap-Nest (Eco Garden Bee Catcher)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Insulated modular swarm trap for stingless bees with sensor grill and tree mounts. 3D printable.

Rating
0 / 5
Likes
16
Downloads
31
Makes
0
Views
564
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Overview

Traditional stingless beekeeping swarm traps rely on improvised 2-liter PET bottles wrapped in cardboard and plastic bags. This project modernizes the trap-nest into a durable, reusable, and biologically optimized enclosure engineered to print seamlessly on compact 3D printers like the Bambu Lab A1 Mini (180 x 180 x 180 mm build volume).

With a total height of 304 mm and an internal volume of ~2.2 L, it closely matches the proven proportions of natural cavities preferred by native stingless bees while providing non-invasive colony monitoring.

Key Design Features

  • Dual-Wall Thermal Insulation: Uses a hollow perimeter filled with 3D gyroid infill to create thousands of micro-air pockets, minimizing thermal fluctuations without requiring messy manual EPS/foam filling.

  • Integrated Sensor Housing: Fits a standard diameter 41 mm round digital mini hygrometer/thermometer. The interior features a built-in 1.2 mm perforated barrier that allows continuous climate monitoring while preventing bees from sealing the sensor vents with propolis/cerumen.

  • Modular 2-Part Assembly: Split horizontally into two interlocking modules (~152 mm tall each) with light-tight tongue-and-groove joints to prevent light leaks, water ingress, and hive pest attacks (Phorid flies / Pseudohypocera kerteszi).

  • Flat Floor & Clean Entrance: Features a bottom-side entrance port with a landing chamfer for wax tube anchoring, elevated above the base floor to prevent waste or condensation buildup from obstructing flight traffic.

  • Integrated Tree Mount: Features a concave back profile with 8 internal zip-tie/cable channels for solid, flush mounting to tree trunks or posts without external brackets.

Recommended Print Settings

  • Printer: Bambu Lab A1 Mini (or any 180 mm3+ build volume printer)

  • Material: White or light-colored PETG (recommended for UV/outdoor durability) or PLA (strictly under full shade)

  • Wall Loops / Perimeters: 4 (ensures total opacity and water tightness)

  • Infill Pattern: Gyroid

  • Infill Density: 12% to 15% (optimal for thermal barrier performance)

  • Supports: None needed (all overhangs and bridges are self-supporting)

  • Wall Generator: Arachne (recommended for clean 1.2 mm sensor grill holes)

Deployment & Usage Tips

  1. Attractant: Generously coat the interior walls, landing cone, and entrance hole with stingless bee propolis extract (cerumen/propolis dissolved in alcohol). Allow it to dry completely before assembling.

  2. Mounting: Secure the trap vertically to a shaded tree trunk or wall using heavy-duty zip ties through the built-in rear channels.

  3. Monitoring & Transfer: Check the external hygrometer for temperature/humidity stabilization. Once a swarm establishes and brood development begins, unclip the modular front shell for smooth, clean colony transfer to a definitive wooden hive box.

Tags