1 / 5
FacetRelay Vase - Triangle-to-Square-to-Pentagon Morph — image 1
1 / 5

FacetRelay Vase - Triangle-to-Square-to-Pentagon Morph

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One-piece support-free vase morphing from a soft triangle through a rotated square into a rounded pentagon.

Rating
0 / 5
Likes
3
Downloads
2
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Standard Digital File License

FacetRelay is a one-piece architectural vase whose cross-section changes continuously as it rises: a softened triangle at the base relays its edges into a rotated square through the center, then resolves into a rounded pentagonal crown.

There is no repeated surface pattern. The character comes from broad planes, shifting corners and long diagonal transitions that move highlights across the vase as it is turned. The result is clean from a distance and surprisingly complex up close.

FEATURES

• Original triangle-to-square-to-pentagon transformation
• Broad sculptural planes instead of decorative ribs
• One-piece, support-free design
• Approx. 109.5 × 107.5 × 210 mm
• Smooth continuous inner vessel
• Modeled 2.4 mm radial wall offset and 3.8 mm bottom
• Stable footprint and gradual print-friendly transitions
• High-resolution closed manifold STL
• Blender source included

PRINT SETTINGS

• Orientation: upright, exactly as supplied
• Nozzle: 0.4 mm
• Layer height: 0.20 mm; use 0.16 mm for cleaner polygon transitions
• Line width: 0.42–0.46 mm
• Walls/perimeters: 4 recommended; 3 minimum
• Top solid layers: 4–5
• Bottom solid layers: 8–10
• Infill: 0%
• Supports: none
• Brim: optional 5–7 mm
• Outer-wall speed: 30–40 mm/s
• First-layer speed: 15–25 mm/s
• Seam: aligned behind a less visible vertical fold
• Arachne/variable-width wall generation recommended

The STL already contains a modeled 2.4 mm radial wall offset and a 3.8 mm bottom. Use normal printing mode; do not enable Spiral/Vase mode.

MATERIALS

Matte PLA gives the planes a soft architectural appearance. Marble or stone-effect PLA makes the vase look carved, while silk PLA exaggerates the moving highlights. PET-G is useful when improved moisture resistance and impact strength are desired.

DEVIL DESIGN PET-G STARTING PROFILE

• Nozzle: 230–240 °C; start at 235 °C
• Bed: 70–80 °C; start at 75 °C
• Part cooling: 30–50% after the first layers
• Retraction: use the calibrated PET-G value for your printer
• Dry the filament if stringing, bubbles or a rough surface appear

SCALING

The model is intended for 100% scale. Scaling to 80% reduces the radial wall offset to about 1.9 mm and the bottom to about 3.0 mm. Avoid aggressive downscaling because every modeled thickness is reduced with the rest of the vase.

WATER USE

A geometrically watertight STL does not guarantee a watertight FDM print. Before using fresh flowers, test the finished print over a sink for several hours. Additional perimeters, calibrated flow, PET-G, a removable liner or a suitable interior sealant can improve water resistance.

The geometry has been digitally validated as one closed manifold component with no open edges, degenerate triangles or critical downward overhangs. The model has not yet been physically print-tested.

LICENSE

Standard Digital File License. Redistribution, resale of the digital files and unauthorized commercial use are not permitted. For commercial licensing, contact the creator through the Printables profile.

Tags