Anthead Bambu X1C-X1 Nozzle Carriage (working)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated carriage_front_plate to work with the original Anthead Bambu Mount again.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original AntHead repository used to support the Bambu X1C nozzle, but has since stopped due to what I assume are design changes to the carriage front plate. This model uses the original AntHead X1C nozzle carriage combined with a slightly modified carriage_front_plate to provide the necessary clearance for the X1C heatsink fins while keeping the filament path perfectly centered.
Hardware Required:
4x M3 (D5mm x L4mm) Heat-Set Inserts
2x M3 x 16mm Hex Head Screws (for mounting the nozzle to the bracket)
Feel free to reach out if you have any questions or issues!
