Anthead Bambu X1C-X1 Nozzle Carriage (working)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated carriage_front_plate to work with the original Anthead Bambu Mount again.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original AntHead repository used to support the Bambu X1C nozzle, but has since stopped due to what I assume are design changes to the carriage front plate. This model uses the original AntHead X1C nozzle carriage combined with a slightly modified carriage_front_plate to provide the necessary clearance for the X1C heatsink fins while keeping the filament path perfectly centered.
Hardware Required:
4x M3 (D5mm x L4mm) Heat-Set Inserts
2x M3 x 16mm Hex Head Screws (for mounting the nozzle to the bracket)
Feel free to reach out if you have any questions or issues!
