58 mm Tamping Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A one-piece espresso tamping station with a 58mm portafilter cradle cut through the plate so the spouts hang free. It al
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A single-piece tamping station that holds your portafilter and the tools around it in one 200mm footprint.
What it holds:
58mm portafilter — front cradle, cut through the plate so the spouts hang free. Open front for the handle.
Tamper — large pocket
Distributor — large pocket
WDT tool — small pocket
Brushes — tall box at the back
Puck screens — slot bank, stored on edge
Size: 200 x 200 x 100mm, printed as one piece.
Print settings:
Orientation: as the model sits in the file. Don't rotate it — the arms beside the cradle carry the tamping force and need the layer lines running flat.
3 walls
15% infill
No supports
Material: [PLA / PETG]
Check your bed. The 200 x 200mm footprint needs a 220mm bed minimum. It will not fit a 180mm printer.
No hardware required. A stick-on cork pad or silicone feet are worth adding if your counter is slick.