Safety 1st Easy Install Walk Thru Baby Gate Top length Screw Extender adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This extends the top portions of the gate making it close on a wider top with a narrower bottom
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Id be surprised if anyone needs this like i did lol. Such a specific use case. Basically the gate I use on the stairs is this from amazon (https://www.amazon.com/dp/B01BTUNHSQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_6&th=1) and it fit in the bottom but the top wasnt wide enough to fully shut the gate. I made these adapters to fit in the top and extend the screws.

Its a tight fit but it works for this model. Edit the fusion file as you see fit but this worked for me. PLA 20% infill seemed good. I didnt use supports just printed it vertically
I enjoy making stuff. If you enjoy it and want to give back to the designer, then thank you and cheers to you!
https://www.buymeacoffee.com/crux3d