Safety 1st Easy Install Walk Thru Baby Gate Top length Screw Extender adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This extends the top portions of the gate making it close on a wider top with a narrower bottom
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Id be surprised if anyone needs this like i did lol. Such a specific use case. Basically the gate I use on the stairs is this from amazon (https://www.amazon.com/dp/B01BTUNHSQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_6&th=1) and it fit in the bottom but the top wasnt wide enough to fully shut the gate. I made these adapters to fit in the top and extend the screws.

Its a tight fit but it works for this model. Edit the fusion file as you see fit but this worked for me. PLA 20% infill seemed good. I didnt use supports just printed it vertically
I enjoy making stuff. If you enjoy it and want to give back to the designer, then thank you and cheers to you!
https://www.buymeacoffee.com/crux3d