PANEL Handles for Prusa Core One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pair of full-length grab handles for the Prusa Core One's acrylic top panel. Compatible with many mods.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 12
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Standard Digital File License
These 200 mm long handles are designed to be used for the Prusa Core One top plexiglas panel and are compatible with many mods, such as:
Thin Magnetic Top Cover Frame for Core One by Itlowe (the one I used)
Prusa Core One Magnetic Top Cover with Integrated Vent Handle by dteng
Print settings
Setting | Value |
|---|---|
Layer height | 0.20 mm |
Material | PETG |
Supports | None |
Infill | 20% |
Required Parts
For M3x 8 mm screws
6 x 1.5 mm insulation for lower side of mod (recommended)
Assembly
Remove the two rivets on the left and right side of the cover mod.
Insert the M3×8 mm screw and thread it through the mod and panel
Align the screw with 3mm hole of the handle and tighten to snug.
Repeat with the second hole and handle.