DWARF Mini Solar Filter Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact protective case compatible with the DWARFLab DWARF Mini solar filter. Magnetic closure
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 35
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
A compact storage case compatible with the DWARF Mini solar filter.
The filter sits securely inside the recessed lower section, protecting it from scratches and damage while it's being stored or carried with the telescope. The case uses an integrated printed hinge with a short piece of 1.75 mm filament as the hinge pin, so no additional hinge hardware is required.
The lid is held closed with four 6 × 1.5 mm round magnets—two installed in the lid and two in the base.
Hardware
4 - 6 mm diameter × 1.5 mm round magnets
Short (~70mm) length of 1.75 mm filament for the hinge pin
Assembly
Insert a piece of 1.75 mm filament through the hinge and trim it flush once installed. Glue the four magnets into their recesses, making sure the magnet polarity is correct before permanently installing them.
The case consists of two printed parts: the top and bottom. No supports should be necessary when printed in their natural flat orientations. The top will need to be flipped recessed side up in the slicer prior to printing.
Designed around the original DWARFLAB DWARF Mini solar filter shown in the photos.