1 / 1
Prusa CORE One+ Gen 2 nozzle wiper holder (STEP file) — image 1

Prusa CORE One+ Gen 2 nozzle wiper holder (STEP file)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D scanned replica of the Prusa CORE One+ Gen 2 Nozzle Wiper holder, shared with the community.

Rating
5 / 5
Likes
45
Downloads
193
Makes
5
Views
1,187
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This model is a faithful reproduction of the Nozzle Wiper holder for the Prusa CORE One+ Gen 2. I created it by performing an accurate 3D scan of the original holder I received. I decided to release the files to share this resource with the community.

Firmware Compatibility

  • Supported printers: Prusa CORE One / CORE One+ with firmware 6.8.1 (or newer).

Recommended Materials

  • ASA / ABS / PC: Highly recommended. They offer the excellent thermal resistance required inside the CORE One's enclosed chamber (engineering materials like PC Blend Carbon Fiber or PC Space Grade are optimal choices).

Printing Instructions

  • Orientation: Use the default orientation of the STL file.

  • Supports: Not required if oriented correctly.

Slicer Settings:

  • Layer height: 0.20 mm

  • Perimeters: 3–4

  • Solid layers (Top/Bottom): 5

  • Infill: 30–45%

  • Infill pattern: Gyroid, honeycomb, or similar.

Installation

The installation follows the official Prusa Gen 2 upgrade guide exactly. After assembly, I highly recommend running the first G12 cycle manually to verify that everything works as expected.

Disclaimer: Since the model is derived from a 3D scan, there might be minimal tolerances or dimensional differences compared to the factory part. Installing modified parts is at the user's own risk; therefore, I assume no responsibility for any potential damage to the printer.

Happy printing!

Tags