1 / 1
Prusa CORE One+ Gen 2 nozzle wiper holder (STEP file) — zdjęcie 1

Prusa CORE One+ Gen 2 nozzle wiper holder (STEP file)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D scanned replica of the Prusa CORE One+ Gen 2 Nozzle Wiper holder, shared with the community.

Ocena
5 / 5
Polubienia
45
Pobrania
193
Wydruki
5
Wyświetlenia
1187
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model is a faithful reproduction of the Nozzle Wiper holder for the Prusa CORE One+ Gen 2. I created it by performing an accurate 3D scan of the original holder I received. I decided to release the files to share this resource with the community.

Firmware Compatibility

  • Supported printers: Prusa CORE One / CORE One+ with firmware 6.8.1 (or newer).

Recommended Materials

  • ASA / ABS / PC: Highly recommended. They offer the excellent thermal resistance required inside the CORE One's enclosed chamber (engineering materials like PC Blend Carbon Fiber or PC Space Grade are optimal choices).

Printing Instructions

  • Orientation: Use the default orientation of the STL file.

  • Supports: Not required if oriented correctly.

Slicer Settings:

  • Layer height: 0.20 mm

  • Perimeters: 3–4

  • Solid layers (Top/Bottom): 5

  • Infill: 30–45%

  • Infill pattern: Gyroid, honeycomb, or similar.

Installation

The installation follows the official Prusa Gen 2 upgrade guide exactly. After assembly, I highly recommend running the first G12 cycle manually to verify that everything works as expected.

Disclaimer: Since the model is derived from a 3D scan, there might be minimal tolerances or dimensional differences compared to the factory part. Installing modified parts is at the user's own risk; therefore, I assume no responsibility for any potential damage to the printer.

Happy printing!

Tagi