EC11 Rotary Encoder Knob – 45mm High-Grip 6mm D-Shaft
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A large 45 mm high-grip knob for EC11 rotary encoders with a 6 mm D-shaft and tight, play-free press fit.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A large 45 mm rotary encoder knob designed for EC11 encoders with a standard 6 mm D-shaped shaft.
The press-fit socket was tested on a real EC11 encoder and provides a tight, play-free fit without screws or glue. The oversized diameter gives finer control and makes the knob especially comfortable for macro pads, keyboards, volume controllers, control panels and other DIY electronics.
The flowing side ribs provide a secure grip while giving the knob a distinctive appearance. The model is fully closed and can be printed with regular infill or at 100% infill for a heavier, more solid feel.
FEATURES
• 45 mm outer diameter
• Designed for a 6 mm EC11 D-shaft
• Tight press-fit installation
• No screw or glue required
• High-grip ribbed surface
• Large diameter for smooth, precise adjustments
• Fully printable without supports
• Suitable for macro pads, keyboards and DIY controllers
PRINTING
Print the knob upright with the flat bottom on the build plate.
Recommended starting settings:
• 0.20 mm layer height
• 3–4 walls
• 15–30% infill for normal use
• 100% infill for maximum weight and a solid feel
• No supports required
FIT NOTE
The socket was tuned for a tight, play-free fit on my EC11 rotary encoder. Shaft dimensions and printer calibration may vary slightly between manufacturers. If the fit is too tight, apply a small amount of XY hole compensation in your slicer rather than scaling the entire model.
If you print it, I would love to see your make and hear how it fits your encoder!