Core One Indx right filament sensor alternate mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mounts the filament sensor where the PTFE-holder-right would normally go.
- Rating
- 4.75 / 5
- Likes
- 14
- Downloads
- 67
- Makes
- 6
- Views
- 620
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1.1
This is a replacement of the PTFE-holder-right and INDX-C1-FS-holder to mount the filament sensor on the upper right side where it is more convenient for certain dry box setups.
It mounts with the existing screws used for the holder right and the screws to mount the filament sensor to the FS-holder.
This should work well with https://www.printables.com/model/1774352-indx-filament-sensor-bowden-adapter-ecas04-pc4-m10/files to add Bowden adapters. See that model for how it mounts on the filament sensor.
I printed this with PETG, with supports and oriented the model with the base down (with the writing on it). Note that the two screw holes do require a little work to remove the supports.
Note that the tools are sensitive to the length of the pfte tubes. I shortened mine by the lengths specified in the assembly guide between the right holder and the filament sensor (each one varies by 30 mm) See https://help.prusa3d.com/guide/4-indx-toolhead-side-filament-sensors_1096247#1103839
A remix was done for the left hand side pfte holder as well.