1 / 8
LED Lantern
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A DIY lantern using strip LEDs and powered by USB-C PD
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
BOM
No. | Item | notes/example supplier |
|---|---|---|
LED strip, 60/m, 8mm wide | Normally uses 2835 LEDs | |
1 | USB PD Trigger module | |
Heatshrink, clear, 35mm | ||
4 | M3 x 8mm self-tapping plastic screws | |
Paracord | for lanyard |
Build Instructions
1 Wrap body with LED strips, cut to length and solder wires to LED strip
2: Heat shrink tube
3: Thread wires through body to base
Follow instructions for the USB PD trigger to set voltage, and check with multi-meter. Solder wires to USB PD trigger module.
4: Insert USB PD trigger module into slot
Add lanyard. Attach base and top with screws. Test, and then you're done!
