Drybox PC4-M10 Fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-part knurled fitting to attach a PC4-M10 PTFE coupler to your drybox. Includes a built-in tube cap.
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 75
- Makes
- 0
- Views
- 666
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Designed specifically for the Sterilite 20qt containers, but compatible with anything with thin walls. Includes a PTFE tube cap built into the exterior fitting to seal up spools that aren't in use. The tube cap has two inner diameters to allow the filament to protrude from the tube while stowed, letting you easily grab and pull when switching filaments.
Fittings are 20mm in diameter, recommended to drill holes no larger than 1/2" - I used 29/64" and would go smaller in hindsight.
Must have one PC4-M10 PTFE coupler and ~1' of PTFE tube per spool.
Included is an alternate exterior fitting with no tube cap.
Also shown in preview image is Design8Studio's "FINALLY — Dry Box actually working great" model, not mandatory.