Gridfinity geological sample trays
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity tubs intended for geological samples, with slots to put your magnets in. No glue required!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Geological sample trays for your rock collection. The tubs are shorter then classic Gridfinity for easier specimen manipulation. The 3x3 tubs require an adapter that I have also added. I recommend adding a small cutout of anti slip mat to the bottom of each tray to protect your specimens.
Equipped with my OG slide in magnet technology. The 2x6 mm magnets can be inserted into the slots on the sides of where you would normally glue the magnet. The magnets just slot into their new homes and can be extracted easily later if need be, without damaging the print or magnets. All you need is a pair of tweezers, a needle or a piece of wire!
Enjoy!
For me the prints worked with PLA and PETG. I have not tested other materials. I recommend "touching build plate" support option.
The print was based on Zack Freedmans tubs with the dimensions from https://gridfinity.xyz/.