S-Pen Cover for A1916 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hard cover replacement for the flimsy fabric S-Pen strap on the A1916 case.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A rigid S-Pen replacement cover designed for the A1916 tablet case from AliExpress. The factory fabric elastic loop doesn't feel secure enough for me; this print provides a solid, secure enclosure that prevents the stylus from damage or slipping out during transport.
Installation
Remove original strap: Carefully cut off the factory fabric strap flush against the case body with a craft knife or flush cutters.
Gluing: Apply a thin, even bead of cyanoacrylate (superglue) to the mounting surface of the printed part.
Cure: Press firmly into position from inside of the case. Maintain pressure for 30–60 seconds, then allow it to fully cure (ideally 1–2 hours) before inserting the S-Pen or attaching the case back to your tablet.
Print Settings
Material: PETG preferred. PLA is acceptable.
Perimeters / Walls: 2–3
Infill: 100%
Layer Height: 0.10 mm ideally, but anything up to 0.20 mm works.
Supports: None