5,995 models
This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…
I created this suspended hand artwork using bridges for the strings. You don't need any supports. It prints in 0.2mm layer height and wall generator set to Arachne in Bambu Studio. In Cura or PrusaSlicer you need to select Print Thin…
This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
Egg dispenser hold 10 eggs from S to L sizes (up to 65x45mm). Print recommendations: Filament - PLA, PLA+ Layer 0.2mm, 2-3 Walls Infill 10-15% With Brim 5mm The Support is not important.
Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
17/08/2023 Update: NOW YOU NEED LESS SPACE. I have lowered the inclination of the upper ramps by one degree, resulting in a maximum design height of only 139.089 mm. Hello there! I create this model of can dispenser because i couldn't…
Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…
Inspired by similar-looking can dispensers, but built from scratch to actually fit cans I use and hold more cans (accommodates around 11-12 standard-size cans). The parts are split to allow printing on a Prusa Mini, with joints hidden as…
This space saving battery dispenser is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. There is a Voronoi pattern on the sides of the magazine to make it easy to see how many batteries are left. The drawback of this design…
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
This is a remix of the cool Thingiverse project of mordaha that I optimized for my requirements in the following terms: used 2x M3x20 screws as lever axles instead of 1x M3 screw and 1x filament levers have a bit more space to each other…
Update: 2025-11-13: Added a remix for a laser-cuttable model. https://www.printables.com/model/1479675-dishwasher-tablet-dispenser-laser-cut-version Dishwasher Tab Dispenser – Sturdy & Simple A no-nonsense, ultra-durable 3D-printed…
This Gridfinity battery dispenser fits 10 AA / 13 AAA batteries per 2x2x1 Gridfinity block, plus one dispensed battery. If you need to store more batteries, you can print another block that feeds batteries into the dispenser block…
[Build video by @Ronny - thx! Don't forget to like & subscribe his channel 😉] BOM: 750g, 825g or 1000g Nutella glass jar (or get the 350g adapter from clausriber ), small candies like chocolate ( not peanut ) m&m's or skittles. Create…
A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…
I loved this tissue dispenser from Crooked_Noozle : Moai Tissue dispenser by Crooked_Noozle - Thingiverse But it was too big to fit in my P1P and I wanted to print it in one piece. There was also the remix from Diggle ( Moai Standing…
This sleek yet simple Dispenser keeps your Cotton-Swab's clean and ready for use. Rather simplistic on the outside, the internal geometry provides proper swap-feeding. Please keep in mind, that the swabs have to be pushed down a little by…
Printable in PLA Layer height 0.3mm No supports Sorry for the photo on the cover which unfortunately does not correspond to the .stl model because the latter has been improved. I still hope you like the model :) Changelog : Multi battery…
Hallo Das ist meine Version eines Eierspenders. Es passen etwa 16-17 normale Eier rein. Es hat auch Platz für grosse Eier! Einfach zusammenkleben, die 6 Bolzen nicht vergessen. Masse: 282mm x 180mm Hello This is my version of an egg…
Mounting options. 1. Four 10x3mm or 3/8x1/8inch disc magnets. Put a small drop of super glue under each magnet. 2. Two #4 flat head wood screws don’t over tighten. 3. Double sided tape. 4. Command strips. Alternate each tea bag 180…
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
While this is nothing new, I designed this to have the glove sizes indicated on the holder. For my purposes I am printing each one from a different color PLA. I was looking for one that was a direct wall mounted option, one-piece…
New version for Jan. 2024! This model previously used alignment dowels, which were fussy and required more print time. They also weren't very strong, since they were printed with the layer lines at their weakest orientation. Those have…
I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Easy to print and Assemble Mason Jar Candy Despenser. Only two parts to print, prints with or without supports. Uses one M4x20mm (or similar) screw to attach the knob. Sized…
It's ~40cm long in total, which seems to be the typical fridge depth. It works, mostly. I did model it from scratch, specifically to adjust the tile angle and fiddle with the supports. Sometimes they rotate while falling and jam, not sure…
New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…
A useful and cool battery dispenser for AA and AAA!
UPDATE 7/27/24: Made a number of changes: Added a “Full” version of the 5-can model with Covers Added covers with slot in the front to make it easier to remove the cans in the top dispenser. (Thanks to @Justnice980 for the idea!) Renamed…
17-04-2024: Added double threaded version as someone requested (experimental) Harder to print and needs support(the base files do not) My projects often revolve around solving niche problems i have. I typically use pill organizers for my…
Nested and keyed Beverage Can Dispenser for standard USA cans (12 oz. / 355 ml). Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT…
Made with stronger connection points and improved printability. Designed to be printable on the Prusa Mini in 6 parts (excluding brackets) or on the XL in one go! Now with optional extensions. The extensions make for an overall length of…
I couldn't find a decent pegboard mountable battery dispenser since most of them were split for easier printing and ended up being not very stable. fns720s dispensers looked like exactly what I was looking for except that they are meant…
This is a remix of the tea bag dispenser by gkmakeit. The dispensers can interlock together and stack together. It is also faster to print and uses less material (if bottom is printed semi-solid). Printed in PLA at 0.2mm layer height with…
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
This is a useful Blade Dispenser for my new Optimized Bed Scraper with replaceable blades. The dispenser holds 45 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
for the correct position use pieces of filament inserted into the prepared holes in the models 9.11. I uploaded a large version
since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issue prints with…
A beverage can dispenser made of strong stackable modules that can hold any amount of a beverage you would like to have on hand. Either in your fridge or elsewhere. I wanted it for my redbull addiction, but I used parametric design so I…
The Alktopus - Your party partner with eight arms! With the Altopus you can elegantly serve the next round, please your friends and all without spilling anything. Whether you're at a beach party, celebrating your birthday, or just…
Print-in-place tape dispenser. Almost takes no more place than the tape-roll itself, so it can fit in your pocket. No supports required. Tested with PLA and PETG, may also be printable in ABS and any other rigid materials. The design…
This is a storage unit and dispenser for AA and AAA batteries. It holds up to 39 AA and 35 AAA batteries. Print the main part twice, with one side mirrored. I’ve also included pegs to attach the parts together. A few drops of super glue…
This artistic desktop ornament features a floating skull within, thanks to the ingenious use of bridges enabled by 3D printing technology. For optimal results, it is recommended to print the piece with a layer height of 0.2 mm and with…
A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…
Perfect dispenser for can´s in the frideg. First in first out, so you always have a coled one :) One dispenser consists out of two parts, there are two center pivot´s for the perfect alignment by glueing together. RedBull 250ml CocaCola…
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
Vertical egg dispenser. Great for saving space in the fridge Can take up to 20 large eggs depending on side. tested ok My first design! You may need to shrink before printing for small eggs to print without support split one of the…
2023 Stackable rotary drink dispenser, improved from model 2022. which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors.…
I designed this automatic cat feeder, complete with reservoir extension. It's a self filling bowl without the need for electronics or intervention... It is however only suitable for cats that don't eat more than they need. You do need a…
A battery dispenser that holds around 20 AA and 35 AAA Batteries!
The tea dispenser can be mounted on top or stacked on a table (version I.). Held in place under the shelf with 2 wood screws 4,0x16 mm, the length depends on the thickness of the shelf. Update 5.4.2022 - New box - version II. Mountable…
3D Printed Cigarette Dispenser (upto 30 standard 8.5cm cigarettes) Watch the video: https://youtu.be/-W0srrSoo7A Based on the wooden version I saw at Youtube, I designed a 3d print model myself using Tinkercad. Main parts are composed of…
If you want a smaller on look at the original: https://www.printables.com/de/model/549833-euro-can-dispenser
This is a little dog that you can screw onto your toothpaste. When you squeeze the toothpaste he poops it out his butt. Print it on its side so the threaded portion stays round.
für 25 Teebeutel leicht zu drucken minimalistisches Design Sichtfenster Teebeutel organiseren
This is an improved version of the print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube. The model was tested by printing in PETG using…
Designed for storing 1kg of dishwasher tablets. Tablets dispense automatically due to the sloped interior. Print orientation:
Manual tape dispenser with automatic cutting Practical and intuitive, this manual dispenser allows you to cut the adhesive tape with a simple turn of the knob. Ideal for packaging, offices and craft activities, it guarantees precise cuts.…
I got a first-gen Nespresso machine eons back and immediately printed out some dispensers for the pods. In fact, these were some of my earlierst prints and the first functional prints allowed in the public spaces of the house. So when I…
Horizontal stackable egg dispenser * *Added new model Extraramp with more inclination, more ramp, but same height, it is necessary to remove an area of the model once printed so that the eggs can pass through the floor below. Practical…
Update: I added a new design for the bin that removes issue with the dispensers interacting with each other. This new bin doesn't use the bottom magnet on the dispenser so I have also added another version of the cap without a magnet hole…
Build your own private candy dispenser with a custom trim! Update April 12th: Uploaded additional .stl (mod by tonitom )with a bigger screw and screw-casing. → The dispenser should be able to convey bigger candies like M&M's with this…
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
A cute dinosaur that dispenses your tape! Improvements over previous version Stronger - I improved the stability in some places where pieces could snap More Sizes - Added a new size for 19mm wide tesa tape. Additionally the rebuild is a…
Turning the knob makes the content of bottle came out in controlled portions. Possible uses: Sugar, Coffee, Tea, Condiments, Powders, etc. … Important Printing Settings and others Print at 0.2mm, no support needed but uncheck PrusaSlicer…
Remixed for a Voxelab Aquila (Ender3) print volume. This version prints in two pieces. Original: https://www.thingiverse.com/thing:5365394 I CA glued the two pieces together. If I had to reprint, I would scale the dispenser down a bit…
Egg dispenser printable as one piece or 4 pieces combined (without supports). Diamensions: cca 80mmx300mmx120mm
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N°1 Pack N° 3 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
Here is some gridfinity storage for standard 19x60mm tape rolls with a 25mm-ish (1") center hole. Scotch tape or equivalent. You know the ones. Worn out hack-saw blades will frequently have some still usable teeth near the ends so there…
This is just an alteration of an existing can dispenser, in order to make it fit the standard 375ml Coca-Cola can in AUS. I also adjusted the size and length of the ramps to give the can enough clearance to fit under the top shelf. Update…
I was inspired by the 50mm Tape Dispenser Cutter. But it didn't work to my liking I drew it to my liking.
The QuickDraw Sleeve & Toploader Dispenser is a premium storage solution specifically designed for efficient organization and dispensing of your trading card sleeves and toploaders. Its innovative design enables hassle-free storage and…
New model redesigned on the original one with a robust upper part, new blade to avoid breakage in the curve acting as a brake (previous slow-down eliminated) and redesigned anti-fall piece. Split models with improved connection between…
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
2024 - New geometry of the beverage dispenser, modified shape of the upper can inlet, beams and more stylized shape. Compatible with previous model 2023. https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser…
Has mundane office work left you in a dire need of excitement? Inject some dark thrill to your desk with this latest invention, Guillotape: The Guillotine Tape Dispenser. Imagine the Addams Family meeting the French Revolution in the…
Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…
The kids and I had this silly idea about having a toilet for our elf on the shelf. One week later and it now exists. For the benefit or the detriment of all mankind. You decide. And Happy Holidays. Build video here:…
Print the two plates for a nice, compact dispenser for your Red Bull cans. I used super glue and the pins on the first plate to put the four parts together.
Battery dispenser for IKEA Skadis Board. Holds up to 11 AA & 11 AAA batteries. There is also version only for AA batteries .
Nespresso dispenser Print instructions PLA 15% infill
Remix of the alktopus. Changed the bottom part to fit Shot Glas with approx. 35mm in Diameter and 55mm in height.
New gadget for your kitchen - Dishwasher tablet dispenser. WAF (Wife approval factor) near 100%! Mounted on double sided tape in any place you want. Also could be mounted angled. Tablet size up to 30mm x 40mm. If your tablets doesn't fit,…
Dec 17, 2022 Please read the entire description before downloading! This is a pillbox with 7 compartments for the whole week. Approximately 20mm x 20mm x 136mm in size. For the hinge I use a piece of filament with ø1,75mm that is about…
Keep your kitchen counter or coffee station organized with this modern Dual-Bay Tea Bag Dispenser ! Featuring an organic wavy exterior design, this holder turns everyday kitchen storage into an aesthetic display piece. The twin-slot…
Having trouble gathering piles of 5 dice for fast rolling your board games and want a printed solution? Look no further! I wanted a way of gathering my wargaming dice in pools of 5 for fast rolling my dice during wargaming sessions. The…
🔋 3D Printed Battery Holder Organizer Tired of loose batteries rolling around in drawers? This 3D printed battery hold
Battery holder / dispenser / box / organizer / storage for AA and AAA sizes. 35 pcs for AA 40 pcs for AAA Please download this file, because it depends on how soon I will get a new product and be able to create new models. This is my…
Refrigerator Can Holder holds 10x 330ml drinks cans (see Print Instructions , below, if your cans are a different size). You put the cans in the front at the top, they roll to the back, drop to the bottom then roll to the front so you can…
This design is based on Fukar's design: https://www.thingiverse.com/thing:3245139 My additions/modifications are: Mounting options for both screws and magnets (10x2mm magnets) This design prints in one piece, which increases part strength…
Nothing to explain just put tea in it and enjoy!
BOM: 450 or 500g Nutella glass jar, chocolate m&m's Attention: The pipe has a left-hand thread, you have to screw it in anti clock wise. All parts can be printed without support (small unclean overhang spots may remain on the non visible…
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
This sugar dispenser dispenses teaspoon-sized doses of sugar by rotating the knob. The reservoir contains about 60 grams of sugar, enough for plenty cups of tea! Print instructions Print at 0.15mm layer height for best fit of threaded…
Thissimple mod replaces the top part / lid of yesimjess' Paintbrush cleaner. I found the screw-mechanism quite timeconsuming. So I replaced it with a leaf spring and push button assembly. No additional hardware is needed for assembly. The…
This stackable can dispenser can be used in a fridge. Select the correct size for your specific cans. They can be from 5 to 9 cans deep. The following chart give the assembled dimensions of the stackable can dispenser. Every dispenser is…
![Skadis Mountable Battery Dispensers (AA, AAA, 18650) [Remix]](https://media.printables.com/media/prints/249888/images/2246798_75dcb08f-f2a9-4a08-b0c6-adff86645ce4/skadis_battery_dispensers.jpg)
