1 / 1
Centauri Carbon Exhaust Downward 100mm — image 1

Centauri Carbon Exhaust Downward 100mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Exhaust vent for Centauri Carbon with downward facing 100mm/4" compatible duct.

Rating
0 / 5
Likes
2
Downloads
4
Makes
0
Views
65
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print with supports (I used tree supports) as shown in the photo.

There is an issue with the original model, which is that the screws already in the back of the Centauri Carbon cannot be reused to secure this exhaust vent. On my printer, these screws only had 3mm shafts. With the added thickness of the exhaust vent, that 3mm was not long enough to thread back in to the printer. I had to get new fasteners to put the vent on. What worked for me was three M3x10mm with .5 thread pitch.

Another issue is that turning the vent resulted in one of the screw holes being difficult to access. I was still able to screw in the screw, but the model is somewhat in the way of itself.

Tags