Adjustable Elevated Pet Bowl Stand – Dog & Cat Bowl Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and sturdy elevated stand for round pet bowls. (12–20 cm)
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 72
- Makes
- 0
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this adjustable three-legged stand for round pet bowls. The bowl shown in the photos is the 19 cm IKEA UTSÅDD, which fits really well.
The stand should work with bowls between roughly 12 and 20 cm in diameter. I haven’t tested every possible size, though, so the exact fit may also depend on the shape and rim of your bowl.
All three legs are adjustable and are secured with one M5 screw per leg.
I included three different versions of the leg:
One with a modeled M5 thread, so the screw goes directly into the printed part
One with a pocket for an M5 nut
One without a thread or nut pocket, in case you prefer your own solution
Simply choose the version you want and print it three times. You don’t need to print all three versions.
For the threaded version, you’ll need three M5 screws. For the nut version, you’ll need three M5 screws and three M5 nuts.
I added roughly 2% tolerance to the modeled M5 thread. On my Prusa MK4S, standard M5 screws went in perfectly without scaling, tapping or any other post-processing. Depending on your printer and calibration, your results may vary slightly.
Please measure your bowl before printing.
If you print one, feel free to share a make!