Counting matching models…
I made arm guards for the Flywoo Explorer LR which are higher than the original ones. This way the arms stay fully protected with mounted side plates. With the original ones the side plates are higher than the arm guards making them less…
This toothbrush holder is designed to fit neatly inside drawers that are at least 2 inches deep, offering a hygienic and space-efficient solution for storing toothbrushes. Its low-profile structure features grooves that cradle the handles…
Low-Profile Hold-Down Clamp – Digital File (STL & 3MF) Upgrade your laser engraving setup with this low-profile hold-down clamp, designed to securely elevate your material above the laser bed. By lifting the stock, this clamp helps…
I needed a stand for my phone at a specific height for video calling while sitting at my desk. I wanted something that didn't have too large of a footprint and designed this. It is meant for my phone a Galaxy S24 Ultra. I would recommend…
Compact elevated dog bowl stand for small dogs. Dual bowls, stable base, clean design.
I made this model to sit on top of a fiberglass telescoping pole tipped with an ACME 3/4-5 thread. This is the typical attachment mechanism for "painter poles". The model has three positions for attaching bottom threaded telescopic…
This is a supported option for the elevated tracks in my previous remix. I think I like the original better, but it's an option for elevated track building. Category: Toys & Games
for the other half just mirror the model These compact laptop feet offer a simple, effective way to improve your mobile workspace. By lifting the back of your device, they provide a more natural typing angle while significantly increasing…
What it is… This is a simple bin that can be configured with the OpenSCAD customizer. The bin has a “foot” that raises it a little. You can add magnets to the bottom (of the foot), so that you can stick the bin on any steel surface. The…
These are elevated card trays for the Settlers of Catan game. They stack the cards at an elevated angle for easy access across the table. They are made for 54x80mm Catan cards, but can easily be used for other sizes. The tray is 84mm…
Found ants were getting into the outdoor cat dish, so I made this in order to help keep them out of the food. Fill the lower section with water to create a moat. Smearing some vaseline on the rim of the lower tray also helps. Screws…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Print upside down Scale it as you like :)
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Add a some small Cylinders as Negative Volume for draining Supports needed (Paint-On Supports, Tree support) Scale it as you like :)
Réhausse de gamelle pour chats et chiens Confort et hygiène pour vos compagnons à quatre pattes ! Matériaux : PLA (écologique et facile à imprimer) ou PETG (plus résistant et alimentaire) Compatibilité : Toutes les imprimantes 3D FDM…
UPDATE 10/05/2024: Added Large Pontoon Floats. UPDATE 10/02/2024: I have reworked everything and added many more options. I have added a lift ring as well. It is super sturdy. This is a 20mm elevated modular skid system for the Holy Stone…
I wanted a good filament guide to prevent tangles. But most of them are too short - if you actually use the full height of your bed, they'll jam up or have problems, if it doesn't literally collide with the filament. Problem is, if you…
This toothbrush holder is designed to fit neatly inside drawers that are at least 2 inches deep, offering a hygienic and space-efficient solution for storing toothbrushes. Its low-profile structure features grooves that cradle the handles…
This is a simple 3-part model for an iPhone Magsafe mount. It's made to be used with an official Apple Magsafe puck, although third party pucks could work if they're the same size. The mount elevates the phone approximately 4.5 inches off…
screw mounted pi holder, keeping it well of the surface at about 2 cm. A maybe rather niche pi holder, where I needed it to be very easy to acces the SD card, while the pi is screwed to a surface. Thought I would share it, in case ;)…
A tablet and 2-in-1 laptop stand to elevate the device by around 8.5cm. The grooves where the device sits are made extra wide and the supports extra tall to account for said laptops. Honeycomb walls make it look pretty. No hardware for…
This swivel mount positions the filament runout sensor higher above the top gantry to facilitate printing very tall models. The v slot mount is snap-in. Requires 3 up to 5 M3 nuts for attaching the sensor to its swivel mount, and the…
Description P1S/P1P and X1C elevated feet. about 6.5 cm high! Just print. Carefully remove the original rubbers. And press it into the raised feet. And then ready to be placed underneath. And now you also have more space under the…
I needed a solution which would allow me to use my Buddistick while on the road, which may involve air travel so “spikes” were out of the question. Therefore, I wanted something I wouldn't have to stick into the ground for situations…
This is part one of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
This is part two of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
Just an empty frame to create art like this: https://www.prusaprinters.org/prints/122835-levi-wall-art-framed https://www.prusaprinters.org/prints/123297-mikasa-from-attach-on-titan-frame Just import into your design tool(I just used…
Raised holder fits various plates and bowls, the inside diameter is 105mm. The optional guard can be added if your cat is a particularly messy eater. Both files can be printed without supports. The splash guard is meant to be removable…
Designed a Phonestand to conquer the clutter on my workbench. The phone is now ~7cm above the surface. It also holds tablets, but be carefull of putting the Tablets vertcal in it, it might tipp over. I printed it with: 0,28 Layerhight 2…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I wanted to clear my kitchen counters of clutter and…
A minimalist and elegant tray designed to let wet items dry efficiently — whether it’s a bar of soap, an oil bottle, a kitchen sponge, or a safety razor. The tray features a sleek rectangular shape with rounded corners and a series of…
Bridge/Support which provides adequate clearance for trains to ride underneath. No support required, just bridging for the upper portion. Have only tested in PLA and have not had any issues with bridging. I recommend slowing down the…
This is a remix of two SpongeBob pineapple house models, turned into a succulent-friendly planter. I simplified the design for a faster print, added small drain holes to the base, and slightly trimmed the top to allow for a larger plant…
This stand is each printed in 3 parts. To have a complete stand for 1 laptop, you need to print this project twice as seen in the cover photo. Each side has been split in 3 parts, with dovetail joints to key in and have the most strength.…
Elevated Neon Cabin is a playful, modernist micro home perched atop two oversized stilts—balancing whimsical design with sharp geometric clarity. Its nostalgic-meets-sci-fi aesthetic, perfect for conceptual neighborhoods, digital art…
A portable elevated drinks coaster made to assist with those who struggle with picking up/reaching drinks. Designed to be used with a drinking straw. This model is 120mm tall when assembled. Parts have been given 0.2mm clearances to limit…
Handy support to elevate an object so that spray painting the edges turns out cleanly. They are a quick print and don't need supports. They are also stackable, so they store compactly. They are about an inch tall (~27mm), and can be…
This organic stand was designed to hold a Switch lite in tabletop mode for use with a controller, but can also hold a Nintendo Switch and should also be able to hold a Switch OLED and a Switch 2 without problem. I recommend using…
In 3mf file, added supports for make top and egg holder part more strong. I added obj, stl and ply files for this model but it is slightly different, couldn't find actual file (I think I overwrite the previous version). Only found 3mf…
Update: New size! Even higher model (20mm) to create epic scenery for your battle! “No more sliding tiles - just epic battles.” I designed these pieces after being frustrated with other 3D terrain models constantly sliding across the…
Really like the original design by Alley Cat What I was missing - it's the heartbeat LED. Also, for my taste, USR button (bigger one) was too flush with case, so it was a little hard to press. Added a Little tactile bump on it. I added a…
Used a single organic support for the end of the arm and secured the cable with a zip tie.
Created an elevated singel-tooth jaws for the brilliant miniature vise. I prefer this one when painting 25mm bases as no higher teeth are blocking the way of thee brush. Print with same settings as original one.
Dimensions Height: 100 mm Length: 295 mm Width: 157.5 mm Compatible Bowls Vibrant Life Stainless Steel Dog Bowl – Extra Small (12 fl oz) Walmart link:…
Low-Profile Hold-Down Clamp – Digital File (STL & 3MF) Upgrade your laser engraving setup with this low-profile hold-down clamp, designed to securely elevate your material above the laser bed. By lifting the stock, this clamp helps…
an elevated icosahedron inspired by Leonardo Da Vinci Category: Math Art
an elevated icosahedron inspired by Leonardo da Vinci and Rinus Roelofs Category: Math Art
a dodecahedral polyknot inspired by the elevated polyhedra of Leonardo da Vinci Category: Math Art
Dimensions Height: 100 mm Length: 157.5 mm Width: 157.5 mm Compatible Bowls Vibrant Life Stainless Steel Dog Bowl – Extra Small (12 fl oz) Walmart link:…
This is a mug stand designed for water dispensers. Many dispensers cause water to splash when a cup is placed underneath. This is particularly unpleasant when dispensing hot water. To solve this problem, I created this tall stand that…
An adjustable elevated phone stand. Three positions, large phone/tablet friendly. Easy to print, few supports. Bambu A1 mini/ Prusa mini friendly. Accommodates charging cables. Holds your device in vertical and horizontal positions. With…
I needed a stand for my phone at a specific height for video calling while sitting at my desk. I wanted something that didn't have too large of a footprint and designed this. It is meant for my phone a Galaxy S24 Ultra. I would recommend…
A unique 3D printable creation — this Pet Bowl Elevated Stand Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
A unique 3D printable creation — this Pet Bowl Elevated Stand Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
This Elevated Buffer Support is made so that the Buffer can stay on the Printer instead of standing on the Desk. It also works great with the Feet Elevation from @prusaguy / Prusa Guy…
Compact elevated dog bowl stand for small dogs. Dual bowls, stable base, clean design.
Elevate your calisthenics training with these heavy-duty parallettes! Designed specifically for a 29.1mm wooden dowel , these handles are elevated to a center height of 105mm , making them perfect for practicing L-sits at a basic level,…
Designed out of frustration with balcony mold because traditional saucers trap water against the floor, keeping the surface perpetually wet and encouraging mold growth. This saucer lifts your pot off the ground and keeps air flowing…
I made this model to sit on top of a fiberglass telescoping pole tipped with an ACME 3/4-5 thread. This is the typical attachment mechanism for "painter poles". The model has three positions for attaching bottom threaded telescopic…
This is a simple thing to elevate the Samsung One Connect Box off the base to allow additional air flow underneath the unit. I did not do this for any specific reason other than the box gets quite warm and thought this would aid cooling.…
This is a supported option for the elevated tracks in my previous remix. I think I like the original better, but it's an option for elevated track building. Category: Toys & Games
This may have gotten out of hand, but after making the other track sections, I felt like I needed to tackle elevated tracks too. This gives you the ability to build up like many of the train track sets do... specifically designed for the…
for the other half just mirror the model These compact laptop feet offer a simple, effective way to improve your mobile workspace. By lifting the back of your device, they provide a more natural typing angle while significantly increasing…
I made this model to sit on top of a telescoping fiberglass pole tipped with an ACME 3/4-5 thread, a typical attachment mechanism for "painter poles". I am using this 20' fiberglass push up pole: https://www.amazon.com/dp/B0FP567P8S The…
I made this to use the vertical space I have on my bookshelf. You can put books on top and some other small things underneath the shelf. You can place them on a row to make it longer. I made this to fit on a 220 × 220 mm printer bed.…
🚀 Core One – Elevated Feet with Front Power Switch (Remix) Tired of reaching all the way to the back of your printer just to flip the power switch? Me too. This is a remix of the excellent Core One Feet v2 , modified to solve two problems…
Elevated Phone holder Quick print, no support needed. Suitable for iPhone 13 and Pixel 6 sizes. Material: PLA, PTEG, etc Layers: 0.2 mm Infill: 10% Brim: No Basic assembly using 4 x M3x20mm caphead screws.
Upgrade your Hauck High Chair with smart storage that doesn't block your robot vacuum! This functional 3D printable adapter perfectly connects an IKEA Trofast bin to your Hauck wooden high chair. What makes this design special? It…
Slightly more robust than zip ties, or painters / gaffing tape alone to protect the sensor strip Dupont connections for the Elevated Sensors Bed Presence for ESPHome when using the wire extensions. My thick foam mattress has to be slid on…
This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit…
As with my earlier post on the rotatable version the aim here is unchanged - i.e. position the drink closer to the driver/passenger for easier accessibility, reduced chance of spills and reduced time the driver's eyes are off the road…
This marble ramp tile is compatible with the Gravitrax system. It has a curve which is elevated exactly 10mm at one side. 10 mm is the height of a single tile. Print settings: 0.2 mm layer height PLA or PETG 15% infill No supports needed.…
Thought it would be cool to give Lucky 13 a Christmas hat for some reason….Thought maybe he could sit on some sort of elevated platform…
Replaces included wooden flange to allow the Origami Dripper to be used directly on a mug without hanging below the rim
This is the ULTIMATE Print in place design atm! It combines I3D’s Scissor jack platform with my Phone holder, and creates an amazing, assembly free, height adjustable, mechanical, semi-automatic, universal Phone holder! Please see the…
first prototype changes will be made elevated surface to give more room when playing tabletop or board games. 5 holes for leg placement one centered and on in each corner for different heights scale the legs on the z axis i printed at 7%…
Very Tall Rear Iron Sight for X-Shot Chaos Meteor blaster. Intended to compensate for my blaster shooting low when used with my Chaos Meteor Accurate HopUp mod. https://www.thingiverse.com/thing:3913710 But if you don't have that issue;…
My printers are sitting on a paver (slab of concrete), which is itself on top of a bit of foam rubber. This substantially reduces the noise produced by vibrations that resonate in the table beneath the printer, but also lifts the printer…
This is a improved phone holder from Turbo_SunShine. I increased the phone angle and increased the size of the tooths so the phone wont fall out so easy. It works great with a Galaxy S8, S10 and A40. Other phones arent tested. You have to…
This is a remix of the Elevated Phone Holder by Lief_3d I have extended the hook seat portion by 2mm to accommodate the iPhone 13 max pro with a protective case. This is a very god and rugged iPhone stand. I have printed multiple units…
I modeled this file, because I couldn't find anything like it. It allows you to sidemount the ender 3 v2 lcd display and uses the screws and t-nuts included with the original mount. The model might need slight support and I recommend…
This is a modular elevated track system for O gauge model train track. This is intended for temporary track layouts. It is easy to assemble and disassemble so that the supports can be stored compactly when not in use. The supports are…
After moving my Ender 3 Pro power supply to the rear of the machine, I needed to elevate the machine a little to be able to ensure there is enough clearance to give better airflow to the fan. Took inspiration from the model “ Ender 3 Pro…
This bowl fits my cat's elevated food plate that I can put water in to keep ants away from the cat's food. I printed the bowl with eSun PLA+ with the usual fast settings in PrusaSlicer, and I varnished the inside of the bowl with…
I'm really enjoying the In Too Deep boardgame, but my giant table mats overlap by a couple inches in the middle of the table, making it hard to lay the board perfectly flat with the seams. Hence, this little elevated tray was made to keep…
Here is a selection of 3 variants for an Echo Dot (4th Gen) stand. They are of slightly different heights (between 43 and 48mm tall) and the legs are of a similar tapered diameter. The tips of the legs contact the table at ~55mm diameter,…
I want to be able to have 2 rows of these Paint Racks and created a raised spacer to be able to place these on top of each other. I have printed these in 0.3mm PLA with 10% infill. Took the help of my friend to fix the file so it was…
Designed to copy the VTech Go! Go! Smart Wheels Train Station Playset 's support for the elevated track. Shouldn't need supports if printed standing up.
This laptop stand raises a Lenovo Thinkpad T490 laptop 95 mm. higher above the table. It provides better posture, room for a separate keyboard under your laptop and still makes the whole setup portable. Printed on a Prusa Mini+. Using…
We have a Nespresso pod-style coffee machine at home which works very well and makes excellent coffee, however standard coffee cups or mugs do not fit on the drip tray below the coffee feed outlet - the gap is too short. I created this…
What it is… This is a simple bin that can be configured with the OpenSCAD customizer. The bin has a “foot” that raises it a little. You can add magnets to the bottom (of the foot), so that you can stick the bin on any steel surface. The…
I saw a bunch of advertisements recently for angled and elevated food bowl holders so i decided i'd make my own and print it since I'm just trying to learn modeling. My cats seem to like them, they don't need to bend over as much any…
I was installing the RepRack Table Top Spool Holder, but wanted a 2nd row of spools, elevated so I could see them, so I added a riser onto the original model.
Elevated dog feeding station which will complement your home interior. Raised bowl stand can help your dog for better posture and gives comfort while eating. I already had two steel bowls for medium-small sized dogs (dimensions in…
Elevated stand for behringer xtouch mini MIDI controller. Because when its lying flat its not so comfortable to use. Two versions included - one with 27mm elevation, so my friends Keychron keyboard can fit underneath it. You can read…
For ham radio operators who use a portable elevated vertical antenna such as the Buddistick, these parts, along with a single fiberglass rod from the farm store or such, will allow you to easily make a non-conductive elevated counterpoise…
![AlleyCat's Heltec T114 Pocket GPS Case [LED cutouts] [elevated user button]](https://media.printables.com/media/prints/241b2d97-8a0c-4c49-a520-2b100dfde4a5/images/10987558_e96b11b5-9647-4d9d-b112-74706dba54b9_1dc5c545-eb88-4bf0-8a4a-0228ad898e03/pxl_20251024_072036621portraitoriginal.jpg)
![#0055 Elevated Stand for Echo Dot 4th Gen (or succulent planter) [3 Variants]](https://media.printables.com/media/prints/394576/images/3294024_2f4ebeba-3070-49ee-a0aa-5f0794713850/20230209_202927.jpg)
