1 / 1
Rear windshield wiper arm extractor (Opel Corsa D)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This tool will make your life easier provided that the thread is not seized.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I have included two versions of the file.
The topology optimised version (chamfered) might drip a bit during printing(depending on your printer), but will work fine and will save material and print time.
Both versions can be printed without any supports.
If your wiper arm is seized no extractor will probably get it out and you might need to cut it with a saw. In any case, before trying to release it, some penetrating fluid will probably help with the extraction.
For the assembly you will need:
-M8 nut
-M8x25 bolt