1 / 4
Meteor75 Pro II 750mAh Battery Clip Holder - 1g V5 — image 1
1 / 4

Meteor75 Pro II 750mAh Battery Clip Holder - 1g V5

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fit-tested clip-on holder for a 65 × 17.3 × 7.5 mm battery. No Velcro. 1.04 g PLA slicer estimate.

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
85
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Meteor75 Pro II 750mAh Battery Clip Holder — 1g V5

A compact, one-piece clip-on battery holder for the BETAFPV Meteor75 Pro II, designed around a 65 × 17.3 × 7.5 mm 750mAh battery. No Velcro, screws or frame cutting needed.

This V5 has been printed and physically fit-tested: the designer reports a perfect fit on their frame and battery. Slicer estimate: 1.04 g of PLA.

How it works

Two connected battery loops attach to the two lower crossbars of the original battery cage. Four upright guides locate the holder in the cage, and the enlarged clip lips grip the frame bars. The compact design removes the long end extensions and end stops; the battery is retained by the close-fitting cage and loops.

Compatibility

- Tested frame: Meteor75 Pro II. Compatibility with the older Meteor75 Pro or other frames is unverified.

- Battery body: 65 mm long × 17.3 mm wide × 7.5 mm thick. Check dimensions, not just the 750mAh rating.

- Designed battery-loop opening: 17.6 × 7.8 mm.

- Measured attachment bars: 3.62 mm wide × 1.20 mm thick, with 14.75 mm clear gap (18.37 mm centre spacing).

- Fit-tested in PLA on one frame/battery combination; flight and crash retention have not been verified.

Print settings

Print at 100% scale, with the flat bottom runners on the build plate and the gripping clips pointing upwards.

- 0.4 mm nozzle

- 0.20 mm layers

- 3 walls

- 4 top and 4 bottom layers

- 15% infill

- Supports off

- No brim generated by the supplied profile

- Tested material: blue Bambu PLA Basic

The supplied Bambu Studio project uses the Bambu Lab X2D 0.4 nozzle profile. Its estimate is 1.04 g / 0.34 m filament / 12m27s, including printer preparation. Other printers and profiles will vary.

Installation

Align both pairs of gripping clips with the two lower cage crossbars and gently seat them until both sides engage. Slide the battery through both loops. Confirm that the frame clips are seated and that the battery is held firmly before use.

Files

- Meteor75-Pro-II-750mAh-Clip-Holder-V5.stl — universal STL, in millimetres.

- Meteor75-ProII-750-Compact-Holder-V5-X2D.3mf — project saved in Bambu Studio 2.8.2.61, closed, reopened without warnings and sliced again. For other printers, import the STL into your own printer profile.

Design notes

Custom geometry developed from measured frame and battery dimensions, with AI-assisted CAD and iterative physical fit testing. Concept inspiration: Meteor 75 PRO battery adapter (https://makerworld.com/en/models/1028097-meteor-75-pro-battery-adapter) and Meteor 75 Pro battery mount upgrade (https://www.printables.com/model/644592-meteor-75-pro-battery-mount-upgrade). The published V5 geometry was built independently; it does not include meshes from either reference.

Licence

Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) (https://creativecommons.org/licenses/by-nc/4.0/). You may share and remix this design for noncommercial purposes with appropriate credit, a licence link, and an indication of changes.

Tags