Wesco Kickmaster trash can replacement pedal – heavy duty
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple and extremely durable replacement pedal for the Wesco Kickmaster. Tested for over a year in a busy workplace.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a replacement pedal for the Wesco Kickmaster trash can.
There are already plenty of other replacement pedals available, but I'm uploading this one anyway because it has proven to be surprisingly durable.
This was actually one of the first models I designed myself when I started 3D printing. It's not the most sophisticated design, but it definitely does the job. I printed two of these in regular PLA to replace both broken pedals on the trash cans at a company with 90+ employees. More than a year later, both are still going strong.
The original Wesco pedals aren't exactly known for their durability, so this turned out to be a pretty worthwhile replacement.
Installation
I mounted mine using 3 mm diameter screws, approximately 30–35 mm long, driven straight through the pedal. It's not particularly elegant, but it works very well and makes for a very strong connection.
One thing to be aware of: the mounting surface of this model is flat and doesn't compensate for the curvature of the trash can. Because of that, you may hear the plastic creak a little while tightening the screws. This hasn't caused any problems on mine — once it's tightened down, it's solid.
I printed mine in ordinary PLA, and despite daily use in a workplace environment, both pedals have survived for more than a year.
Note about the photos: the company logo visible on my prints was added directly in the slicer and is not part of the model. Unfortunately I don't have any photos of the pedals without it.