1 / 4
5020 Bed Fan for Trident — image 1
1 / 4

5020 Bed Fan for Trident

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For helping those chamber temps without setting the house on fire

Rating
0 / 5
Likes
2
Downloads
4
Makes
0
Views
59
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I wanted a 5020 bed fan to help distribute chamber temps and this is what I came up with.

It uses. 5020 blower like this one from AE

I think most others should work but I've not tried them. The design includes wiring channels for the fan wire and also to route other wires to the front of the bed frame. I did this because I have status LEDs mounted under the bed on the front of the front extrusion.

Remove the half of the fan casing with nothing attached (no wires, motor etc) as the print replaces this half.

Mounting is via 2 M3x8 bolts and roll-in or t-nuts. Optionally you may want to use M3 bolts to hold the fan in but I found a friction fit was sufficient. 

Recommend ABS or ASA or better. Supports needed for the underside

Tags