Core One+ Gen2 INDX Spoolholder Caps
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.06 – €1.30 net (excluding VAT)
For file: spoolholder_endcaps_4x_0.4n_0.2mm_PLA,PLA_COREONEINDX_50m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.18 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 49.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spoolholder caps for the current Core One+ Gen2 INDX spoolholders
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 88
- Makes
- 11
- Views
- 580
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
You'll find models for the cap, for the numbers and the decorative ring.
I provide the plain base model which doesn't contain any numbers so you're free to add whatever you want on your endcaps. The numbers are in bold Helvetica font to mimic the Core One font style.
The endcaps are oriented to make the numbers upright. Others I've seen do not compensate for the slight rotation of the mating pattern.
I've also added small slits on the side to make removal of the caps easier. You can use a screwdriver (or fingernails if you're brave).
Clearance is 0.25mm which gives me a good press fit, I hope this works for you as well. If not, I can provide the caps with some variations.