Push Button Novelty Soda Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decorative non-functional push-button soda dispenser designed as a display piece or prop.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a novelty push-button soda dispenser designed as a decorative display piece, prop, or game-room/kitchen accessory.
The model is based on the look and proportions of a traditional push-button fountain drink dispenser, but it is completely nonfunctional and is not intended to hold or dispense liquids.
The design is split into separate parts to make printing, finishing, and assembly easier. The removable spout attaches using an M3 screw and M3 nut, allowing it to be removed or replaced if needed.
The front of the dispenser includes dedicated areas for custom printed graphics, so you can create your own fictional soda brand, color scheme, or themed design.
Hardware Required
1 × M3 screw
1 × M3 nut
4 × 9.5mm × 3mm Magnets
Graphic Dimensions
The model is designed to accept custom printed graphics in the following sizes:
Upper soda label area: 61 mm × 63 mm
Approx. 1441 × 1488 px at 600 DPIPush-button graphic area: 59 mm × 31 mm
Approx. 1394 × 732 px at 600 DPI
Custom Graphics
You can create your own graphics using image-editing software or image-generation tools such as ChatGPT.
Example Prompt – Soda Label
Create a printable soda dispenser label graphic for a full-size novelty push-button soda dispenser. Make it 61 mm wide by 63 mm tall at 600 DPI. Use a retro soda fountain style with square corners, a bold border, and a clean centered layout. The label should say “[INSERT SODA NAME]” in large bold letters, with a smaller subtitle such as “[INSERT FLAVOR OR TAGLINE]”. Include decorative elements like bubbles, stripes, or a simple soda cup icon. Use a high-contrast color scheme and make it look like a real soda fountain label. Keep it clean, printable, and suitable for a novelty display piece.
Printing the Graphics
When printing your graphics:
Print at Actual Size or 100% scale
Do not use “Fit to Page” or automatic scaling
Test-print on regular paper first
Measure the printed result before using sticker paper or adhesive media
The finished soda label should measure 61 × 63 mm, and the button graphic should measure 59 × 31 mm.
Notes
This model is intended for decorative use only. It is not food-safe, pressure-rated, watertight, or designed to dispense beverages.
Sample graphics shown in the listing were AI-assisted. The 3D model itself was designed from scratch.
Please use only original or properly licensed graphics. Branded or trademarked soda graphics are not included with the model.