4x1 mm dot for button helper with Prusament PETG Ultraglow Green
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small glow-in-the-dark marker to help locate one or more buttons in the dark.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This little dot may seem insignificant, but it’s incredibly useful: it helps you find what you’re looking for in the dark!
Printed in less than a minute with Prusament PETG Ultraglow Green, it can be applied anywhere with a bit of glue: stick one down, then a second, then a third, and mark everything that needs to be located in the dark.
Be careful Prusament PETG Ultraglow Green is very abrasive for classic nozzle and PTFE tube, so please be sure to read PRUSA's recommendations and configure your machine accordingly before printing.
With that done, the print settings are very standard:
profile: 0.2 Structural
no brim
Enjoy your print!