1 / 6
Rugged Case for 12× BETAFPV LAVA II 1S 580mAh Batteries — image 1
1 / 6

Rugged Case for 12× BETAFPV LAVA II 1S 580mAh Batteries

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A compact and rugged storage case designed specifically for 12 LAVA II 1S 580mAh LiHV batteries with BT2.0 connectors

Rating
0 / 5
Likes
6
Downloads
32
Makes
0
Views
230
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Rugged Case for 12× BETAFPV LAVA II 1S 580mAh Batteries

A compact and rugged storage case designed specifically for 12 BETAFPV LAVA II 1S 580mAh LiHV batteries with BT2.0 connectors.

The batteries are stored vertically in individual slots arranged in a 3×4 layout. This keeps them organized, prevents them from moving around inside the case and leaves the connectors easily accessible.

Features

  • Holds 12 BETAFPV LAVA II 1S 580mAh batteries

  • Individual slot for every battery

  • Compact 3×4 arrangement

  • BT2.0 connectors remain accessible

  • Reinforced rugged-style body

  • Hinged lid with a centered front latch

  • Suitable for storage and carrying batteries to indoor or outdoor FPV sessions

  • Approximate external dimensions: 68.5 × 92.9 × 84.8 mm

Compatibility

The case was designed and test-fitted with:

BETAFPV LAVA II 1S 580mAh 3.8V LiHV batteries with BT2.0 connectors

Other batteries may fit, but compatibility has not been tested.

Printing

PETG is recommended for better impact resistance and improved temperature resistance during transport. PLA should also work for normal indoor use.

For a durable functional print, use at least:

  • 0.20 mm layer height

  • 3 perimeters

  • 0% infill - just add modifier on first 1.6mm to keep gyroid infill at 15%, the rest can eaisly go with 0% to save time and material, just set bridge speed at 10mm/s and should work well.

Required hardware
  • 2× M3×35 mm headless set screws or metal pins for the front latch

  • 1× M3×45 mm headless set screw or metal pin for the rear hinge

Depending on the printer tolerances, the M3×45 mm hinge pin may need to be shortened to approximately 43 mm. Smooth 3 mm metal rods cut to the required length can also be used.

Tags