XTEInk X4 Pro dock for the Sprinkle 3D printed cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
XTEInk X4 Pro dock for the Sprinkle 3D printed cover (see link in description).
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 126
- Makes
- 0
- Views
- 802
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
The XTEInk X4 Pro is a great little e-ink reader, but it's also very small and thin, which makes it very fragile. I looked at some commercial alternatives for cases, but was unhappy with them. I then found the Sprinkle XTEInk X4 Pro Case which I use and love, but it didn't work with any other 3D printed charging docks I could find online.
This model allows you to charge your X4 Pro directly in the case, in a convenient desktop dock. It also holds the pogopin and USB-C cable securely in place, preventing unwanted disconnections.
Features
Simple print: No supports or brim needed.
Precise fit: The factory Pogopin/USB-C adapter fits entirely by friction. Push it in as far as it will go and then plug the USB-C cable.
Easy operation: To charge, just lay the X4 Pro + case on the dock. The magnets on the charger will hold the X4 Pro in place.
Easy to remove the adapter: The design includes a hole on the left side so you can push the pogopin adapter with a small screwdriver to pop it off.
Printing Instructions
Just download the STL file and use the "Auto Orient" feature of your slicer.
No brims or supports needed.
Please note: The pogopin adapter fits very precisely. If your printer is not calibrated and the fit it too right, resize the entire part by 0.5% or so.
Notes
The author of Sprinkle also includes a screen cover that is compatible with the case. Unfortunately, you'll have to remove the 3D printed screen cover (if you're using it) to charge. I tried to make the design of this dock compatible with the screen cover but some dimensional details make it incompatible with this style of dock.
I'm also including a step file is you want to play around with the design.
The dock is very lightweight. You may want to use rubber feet or double-sided tape to keep it in place in your desk.
My thanks to Light-years layers for his awesome Sprinkle project.
