Display Glare Shield for the Creality K2 Pro

🖨 Display Glare Shield for the Creality K2 Pro

One thing that bothered me about the Creality K2 Pro was that, depending on the room lighting or angle of incoming light, the display could have quite a lot of reflections and become difficult to read.

That's why I designed and 3D printed a simple glare shield for the display.

The shield blocks disturbing light from the sides and above, helping to reduce reflections and making the display easier to read – especially in bright rooms or when windows and lamps are reflected on the screen.

✨ Features

• Specifically designed for the Creality K2 Pro

• Reduces reflections and unwanted light from the sides and above

• The display remains fully visible and accessible

• Simple and functional design

• Quick and easy to print

• No complicated post-processing required

• A practical little upgrade for your printer

Important: This version was designed specifically for the Creality K2 Pro and will not necessarily fit other Creality printers.

I will gradually design and upload additional versions for other printer models as well.

🔧 Small Upgrade – Big Difference

It's only a small accessory, but especially in unfavorable lighting conditions, the glare shield makes the K2 Pro display much more comfortable and easier to read.

I'm making this model available to the 3D printing community as a free download.

If you print it, I'd love to see photos of your version and hear your feedback about the fit. 😊

Happy Printing! 🖨

3D-Druckeinstellungen

🧵 Material Recommendations

PLA – My Recommendation for Normal Use

For most applications, PLA is perfectly suitable for this part.

Recommended Print Settings:

• Material: PLA / PLA+

• Layer Height: 0.20 mm

• Nozzle: 0.4 mm

• Walls: 3

• Infill: 10%

• Nozzle Temperature: approx. 200–220 °C

• Bed Temperature: approx. 50–60 °C

• Support: Required

• Support Type: Tree Support – Hybrid Structure recommended

PLA is easy to print, dimensionally stable, and works very well for this type of part.

PETG – For Increased Temperature Resistance

If you prefer slightly higher temperature resistance and a little more flexibility, the glare shield can also be printed with PETG.

Recommended Print Settings:

• Material: PETG

• Layer Height: 0.20 mm

• Nozzle: 0.4 mm

• Walls: 3

• Infill: 10%

• Nozzle Temperature: approx. 230–250 °C

• Bed Temperature: approx. 70–80 °C

• Support: Required

• Support Type: Tree Support – Hybrid Structure recommended

Of course, the exact temperatures should always be adjusted according to the filament you are using.