Counting matching models…
I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…
The camera from Qidi for the X series printers suffers from some pretty bad glare. This sub 13-minute print will make your camera look so much better. Be caution of your material choice due to internal chamber temps.
This is a sun shade intended to reduce glare on the QS-S4 LCD used on many, many brands of E-Scooters. Zero, Apollo, and many many other manufacturers and importers use this same LCD. I printed it last night, have not had a chance to ride…
Here is the Glare, I will do a copper golem soon, so stay tuned !
I went looking on here and other file sharing platform for this design. to my surprise their was none, so i made it this just stops the annoying glare from hitting your eyes. it does not affect platform lighting at all unfortunately the…
A 1:1 replica of the real life A320 Dimmer Knob that sit underneath the Glareshield. Files include multiple objects that are different colors. Print with black and white PLA. Designed to mount on a standard 6mm potentiometer shaft and…
Glareshield for Daher Socata TBM 900 for flight simulation cockpit builders. It is printed out of 15 pieces that is glued and screwed together. Note that its not as deep as the real glareshield e.g. only about 36cm deep. I printed mine on…
This A320 Glarewing is designed to be connected to the Winwing/WinCtrl EFIS-L and programmed with Mobiflight. When attaching to the EFIS-L, the bottom left screw of the EFIS can be removed, but the top must stay connected (There is a…
I printed mine out of ABS standing up with tree supports. I developed this design using ABS so if printing in another material that doesn't shrink as much as ABS you may need scale the model slightly.
This is the front panel for the WinWing glareshield for the A320. I combined the available resources and created a front panel for the housing from JimmyB-UK . All the information needed to create it can be found in the individual linked…
INFO: v2 online to reduce collisions with PTFE Tube while printing bigger Parts! This is a Anti Glare Shield Upgrade for "THE BEST BAMBULAB X1C AND X1 LIGHT UPGRADE MOD - X1C LOWRIDER COB LED SYSTEM" I like the Model from @TheLightSpeed…
A friend had a bit of cardboard taped over the top of his GPS unit to stop the glare from his steeply sloping windscreen. I figured there had to be a better way! This cover slips nicely on top of the TomTom device and all buttons and…
Changes from other designs Increased the FOV and added a cowl. Tested the shield to make sure it rarely enters frame. Made a better, tighter fit at the back clip (at least on my Mavic), Strengthened and thickened the base of the print so…
Ender 3 S1 Pro - Glare Stopper, Light Shield Three models: v1 - with holes v1.1 - with rounded holes v2 - with rounded rectangles Printing parameters: Print material: PETG Speed: 50 mm/s Infill: 100% Supports: NO Outside dimensions:…
sprintech.net Happy printing If you like what I do, you can Buymeacoffee 40.5mm Lens Hood Cover for Sony E PZ 16-50mm f/3.5-5.6 OSS Lens This 3D model is designed as a lens hood cover / anti-glare cover for the Sony E PZ 16-50mm f/3.5-5.6…
Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts…
This part is mounted on the bottom of the Z axis rail on the A1 Mini. The black filament will lower down the overal brightness of view that the monitoring camera sees, which tricks it into boosting up the brightness of the livestream.…
Deutsche Version weiter unten: I thought it might be interesting for others to see what I have been working on as a small side project: I live in the northern hemisphere and I do some road cycling. Unfortunately, during spring and autumn…
Downlight Glare Shield. The inner diameter of the shield measures 79mm. If you need a 64mm shield => 100 / 79 * 64 = 81.01 => Scale it to 81% Printed in PLA 3 Perimeters Feedback is welcome and I'm excited to see your prints. Happy…
I had issues with light casting into other areas of my house from our rooms. To stop this I originally installed metal pieces like this printed one and installed with tiny screws. Nice to be able to design these and just print them. We…
Leupold VX Freedom 4-12x40 compatible glare shield. Fits snugly, use round elastic to hold it in place by looping around the top turret.
A glare shield that fits Logitech/Saitek flight sim/radio panels using the original screws, just take the washers off. Designed to block glare from LED strips mounted underneath the panels. Print Settings Printer Brand: Creality Printer:…
Ssomething to attach your LED strip and cable.
Stops light glare from the light on the Ender 3 S1 Pro (or other printers using the same light bar)
Printed in PLA black matte Layer 0.2mm Perimeter 3 Downlight Diameter 78mm Have fun printing and thanks in advance for your makes, likes, and feedback.
Print in any material. - I used PLA. Ideally, use black, but any colour works and doesnt impact/tint video feed. Attach with some removable adhesive or double sided tape. (I used the tape) This simple model is only ~3g, which is perfect…
The Nitecore Thumb is an excellent submini hands-free rechargeable flashlight. But when clipped to the chest, the hemispherical lenses cast light directly into the eyes of the wearer, even at maximum forward tilt of the light. This shade…
I designed the glare that lost the 2021 mob vote. Individual printing for body, eyes (which can be glued in), and the full thing. Category: Video Games
FPV glare protection - sun cover small Category: R/C Vehicles
made it for the idf soldires that use it to stop the sun from reflecting from the optics of the Binocular
A very simply anti-glare protection for Dell WB3023 webcam
Glare Shield for Novostella RGB Flood Lights.
🖨 Display Glare Shield for the Creality K2 Pro One thing that bothered me about the Creality K2 Pro was that, depending on the room lighting or angle of incoming light, the display could have quite a lot of reflections and become…
This print extends the glare guard on the VOLT® Lusitano Mini Brass Lanai Light (Black) to contain the light to a smaller footprint. The extension includes a cutout for the thumb screw that holds the glare guard to the light. I've…
Space between bolts is 176mm may fit to some other Led-par models as well. There is also small recess for mirror film if want glue one and give light more reflection power.
Are you tired of direct LED light shining in your eyes from your monitor light bar as well? This project solves that problem. This shield slides onto your light bar from either side, blocking direct line-of-sight to the LEDs without…
I had trouble whenever I would aim towards the setting sun with my scope. This shroud helps keep the picture clear in the sun. designed to slide over the end of a Vortex Strike Eagle or any other roughly 40mm diameter scope tube. I…
🖨 Display Glare Shield for the Creality K2 PLUS One thing that bothered me about the Creality K2 Plus was that, depending on the room lighting or angle of incoming light, the display could have quite a lot of reflections and become…
My Zebralight sc62 flashlight doubles as the best bikelight I've ever had. In order to not blind any oncoming traffic I created a cap that directs the beam so it only iluminates the ground. Print Settings Printer Brand: LulzBot Printer:…
Made to reduce glare on bright LED puck lights, especially on low ceilings like in a finished basement. These fit lights with an overall size of 7.25" (185mm). Print in black!
Possibly the weirdest print I've ever done. I prefer to game in a dark room and that Quadcast with red LEDs can't be controlled by the software, thus it's glowing when on and quite visible on my monitor in dark games / scenes. The glare…
[Glare Screen] useful for Welding, Fish Tanks, Aerogarden, Hydroponics, Photography Flash… you can create a simple lightweight universal glare screen blocking 99% of light from a particular strong source. for example me: i have two…
Behold, it's the coaster nobody ever asked for. The crowd favourite. It's BLOB-GLARE. It's designed to be printed with a 0.4mm nozzle, 0.2mm layer height. 15 layers / 3mm thick, a bit odd shaped but about 100mm diameter. The perfect…
This clamp will hold the CZUR Aura antiglare add-on lamp so it doesn't slide down whenever you touch the scanner. I see that they currently offer it only with the X Pro model which has a battery, but Kickstarter packages had this lamp…
NOT tested in the dark with a bike yet! I was out riding my bike after sunset, and met some people in the middle of the woods. They were all clearly blinded by my light even though I had angled it almost straight down. Not able to find…
Protective Lens Cover for Flashlight/Optic Ø 30 mm Softair accessory designed to protect the flashlight or optic lens when not in use and to prevent unwanted reflections that could reveal the player’s position during gameplay. The lens…
A glare shield for an oscilloscope. Its sized to fit my ancient Tektronix 465, and can easily be scaled for a different application. Print on spiral vase mode, one wall, no top or bottom layers, no infill. I printed with a brim, but it…
FPV glare protection - sun cover big Category: R/C Vehicles
Axioma, or Heiland in Germany, is a digital water meter with a flat display. In this case, the flash is too bright and f
Made for IPhone 16 but works with most sizes
Reduce glare from recessed potlights with this 3D printable blind. Designed to fit most common household recessed potlights with a trim diameter of 125mm, 135mm, or 145mm. Printing recommendations: PETG is recommended for higher heat…
Wurkkos HD03 Flashlight Torch Shade - Locks the Clip - FreeCAD Model Use the Wurkkos HD03 as Bicycle Light. Use this push-in shade to avoid blinding oncoming cyclers.Additionally it locks the clip and prevents accidental opening.…
You also need to print a fitting counterpart! See below. Wurkkos HD10 Headlamp Mount for Vello Bicycle with shade + FreeCAD Model Holder for the Wurkkos HD10 headlamp , allowing it to be used as a bicycle light on a Vello bicycle or…
I am happy to announce the new version of the Protective Lens Cover for Flashlight/Optic Ø 30 mm Softair accessory designed to protect the flashlight or optic lens when not in use and to prevent unwanted reflections that could reveal the…
The Lezyne Micro Drive Pro 1000+ bike headlight is an absolutely brilliant piece of kit for off-road riding at night, but on the road it would blind oncoming traffic terribly. That’s why I’ve designed an attachment that prevents the beam…
Dark Sky B10 Candelabra Glare Shield designed to place on top of a B10 Candelabra bulb to meet DarkSky International requirement of zero uplight and shielding of bulb glare. NOTE: Use only with LED bulbs. Print in minimum PETG to…
Dark Sky B11 Candelabra Glare Shield designed to place on top of a B11 Candelabra bulb to meet DarkSky International requirement of zero uplight and shielding of bulb glare. NOTE: Use only with LED bulbs. Print in minimum PETG to…
Recommendations Enable support : ON Ironing type: All top surfaces that way, i find the print to looks a bit better.
Fixture Glare Shield for screw supported light globe. This is to retrofit old exterior sconce lights where the bulb is visible. The shield is limit light projection down, remove any uplighting and bulb glare. NOTE: Use only with LED…
Sit-on shade for the IKEA RÅSEGEL concrete table-lamp base (Ø 80 mm, E27). Hides the bulb from eye level, lets light out through a thin wall, small side holes, and an open top. Fit Rests on the top rim of the concrete base, around the…
You also need to print a fitting counterpart! See below. Wurkkos HD12 Headlamp Mount for Vello Bicycle with shade + FreeCAD Model Holder for the Wurkkos HD12 headlamp , allowing it to be used as a bicycle light on a Vello bicycle.…
Space between bolts is 176mm may fit to some other Led-par models as well. There is also small recess for mirror film if want glue one and give light more reflection power.
Behold, it's the coaster nobody ever asked for. The crowd favourite. It's BLOB-GLARE. It's designed to be printed with a 0.4mm nozzle, 0.2mm layer height. 15 layers / 3mm thick, a bit odd shaped but about 100mm diameter. The perfect…
Deutsche Version weiter unten: I thought it might be interesting for others to see what I have been working on as a small side project: I live in the northern hemisphere and I do some road cycling. Unfortunately, during spring and autumn…
A glare shield for an oscilloscope. Its sized to fit my ancient Tektronix 465, and can easily be scaled for a different application. Print on spiral vase mode, one wall, no top or bottom layers, no infill. I printed with a brim, but it…
A very simply anti-glare protection for Dell WB3023 webcam
Ssomething to attach your LED strip and cable.
GlareShield for the A10C II as a part of a project to 3dprint some parts of the cockpit The Fireplates i made with a laser cutter, but its makeable in 3d printing. The handels are without electronics for now but its easy to ad a switch…
Find out everything you need to know about the powerbank on my blog: https://nerd-corner.com/glare-free-lamp-and-powerbank/
I suggest that it be printed in ABS as I do the rest of the frame - as Warpster suggests. I printed the frame originally in PETG and it was fine printing PLA, but once I started printing ABS, the PETG sagged - so save yourself some time…
