1 / 2
Komelon Tape Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement handle for a 100' Komelon measuring tape.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a replacement handle for a 100' Komelon tape measure. It uses the original metal pin from the tape. I had sucess punching the original pin out with a spring punch. The pin hole on the new handle is purposefully a little small. Once in place, I drilled it out to have a tight fit with the pin. Make sure to place the handle spinner appropriately in the slicer so that it is free from the rest of the handle and can spin freely (see photo). A cross-section makes it easier to check your clearances.