Fidget Ghost
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A print-in-place fidget ghost for your desk. Twist it, slide the stem or lift it into a cone-like shape. No supports.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The "Keeps Your Hands Busy" Fidget Ghost 👻
A fidget toy for your desk. It sits flat as a friendly ghost, and every way you move the stem gives it a different look.
🟩 𝗪𝗔𝗬𝗦 𝗧𝗢 𝗣𝗟𝗔𝗬
▸ 𝗧𝘄𝗶𝘀𝘁 𝘁𝗵𝗲 𝗦𝘁𝗲𝗺 — Leave it flat on the desk and twist. The rings shift against each other into new designs.
▸ 𝗣𝘂𝘀𝗵 𝗮𝗻𝗱 𝗣𝘂𝗹𝗹 — Slide the stem from side to side and the rings move around to their stops for a whole different set of visuals.
▸ 𝗟𝗶𝗳𝘁 𝗜𝘁 𝗨𝗽 — Raise it by the stem with a slight twist and the 22 rings drop into a cone-like shape.
▸ 𝗛𝗲𝗮𝗿 𝗜𝘁 𝗦𝗲𝘁𝘁𝗹𝗲 — Raise and lower it on the desk and it makes a satisfying sound as the rings come back down.
▸ 𝗧𝗲𝘅𝘁𝘂𝗿𝗲𝗱 𝗦𝘁𝗲𝗺 — The stem is textured, so it has a tactile feel under your fingers while you fidget.
🟩 𝗪𝗛𝗔𝗧 𝗠𝗔𝗞𝗘𝗦 𝗜𝗧 𝗪𝗢𝗥𝗞
▸ 𝗣𝗿𝗶𝗻𝘁𝘀 𝗶𝗻 𝗣𝗹𝗮𝗰𝗲 — One print, no assembly. All 22 rings and the stem come off the plate already captured inside each other.
▸ 𝗕𝘂𝗶𝗹𝘁 𝘁𝗼 𝗛𝗼𝗹𝗱 𝗧𝗼𝗴𝗲𝘁𝗵𝗲𝗿 — An even gap of about 1mm between every ring keeps the ghost shape intact, so the rings slide and drop without coming apart.
▸ 𝗧𝗵𝗲 𝗘𝘆𝗲𝘀 𝗔𝗿𝗲 𝗣𝗿𝗶𝗻𝘁𝗲𝗱 𝗜𝗻 — Two black eyes, one layer deep, for only two filament changes and under 3g of purge.
🟩 𝗖𝗛𝗘𝗖𝗞 𝗬𝗢𝗨𝗥 𝗕𝗘𝗗 𝗙𝗜𝗥𝗦𝗧
▸ 148 x 179mm and 39mm tall with the stem. Leave room beside it for the prime tower if you print the eyes in black.
🟩 𝗣𝗥𝗜𝗡𝗧 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦
No supports required · no brim · 0.20mm layer height · 2 walls · 10% grid infill · PLA
Printed on a Creality Hi 1 in 3h 55m and 105g. Happy fidgeting! 👻