Split top rim for Snapmaker U1 - quickly remove side panels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Splits the top rim into 6 pieces to minimize # of screws to remove during maintenance
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
There are three plates:
U1-rimBackLR-PETG.3mf (two main corner pieces plug joiner piece)
U1-rimFrontLR-PETG.3mf (two main corner pieces plug joiner piece)
U1-rimSide-PETG.3mf (one side piece - must print two of these)
Print settings:
0.2mm layer height
Supports ON
PETG preferred
Message from the designer, Liko:
Whenever you will do some maintenance (yes, you want to) on your U1, you have to remove the side cover. It's not a big deal, just 8 screws hold each. Before that, you have to remove the top rim, 4 screws, it's okay. But I really HATE to unscrew the 4x2 screws of the USB-C cables, its so difficult. Why, why, why to do something there, when I just wanted an access to the side!
Here is my solution: Split the rim into 3 groups: back, sides, front. Yesss, then, you remove only 2(!) screws of the front rim (which then unlocks the side rims) and can continue directly with the sides...