1 / 10
Adjustable dust boot for Ratrig CNC or 80 mm spindle — image 1
1 / 10

Adjustable dust boot for Ratrig CNC or 80 mm spindle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adjustable (up/down) dustboot for Ratrig CNC Stronghold Pro or 80 mm spindle in general.

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Adjustable (up/down) dustboot for Ratrig CNC Stronghold Pro or 80 mm spindle in general. The dustboot position can be adjusted up and down based on the thickness of the workpiece. The adjustment is easy, with a knob. 

The bottom part (with brushes) contains 4x4 magnets and it is easily removable from the base. I also implemented 4 dowel pins for firmer lateral hold (not necessary to integrate). The black brushes fit directly into the groove of the bottom part. I glued them with hot glue. The magnets fit perfectly, glued with cyanoacrylate glue (fast glue). 

The middle and top parts must be glued together. For perfect alignment, I added 3 dowel pins. I glued both parts together with epoxy glue (5 min) - also to fill up the potential gaps, thus avoiding loss of suction power. Don't glue together the moving part that squeezes the spindle to fix everything. 

Threaded inserts: M4 x 8 mm. One goes into the knob. Another goes into the Top part with a bit of struggle. You have to bend the moving part up and find space for the hot tip to push the insert in. The moving part is sturdy enough to withstand the bending. I printed everything with PLA (infill 30%). 

The knob uses an M4 screw. I used one screw I had, which I cut the head off. I used Loctite to fix the screw in the knob. 

The spring (8 x 22 mm) can also be added between the moving part to hold it tight and protect against unscrewing the knob during work (vibration resistant). This is optional, but if you experience unscrewing during the process, the better to add it. 

The pulno-tube part also has magnets (4 x 4 mm) and dowel pins for extra security - also optional to add. The pulno-tube part directly accommodates the 100 mm Pulno flexible tube. It is widely available. The pulno-tube part can be modified to fit different diameters. 

ADDITION: 

I added a detachable bottom section (left and righ part). The advantage is that it can be removed during a pause or if the bit is too close to the workpiece. It uses 4 x 4 mm magnets and 5 x 10 mm dowel pins. 

Tags